Alexz360's New Ibiza :) New Wheels In Progress :D

[phillpotts92]

I'm pricing all my hosing up today whilst at work lol. Here till 9 so may as well. I think I might go for some thicker hoses tho so it looks a bit more beefy in the bay so thinking 76mm so will bed a 90 51-76 reducer Bend then to a 76mm 90 bend then a 76mm straight piece to the filter. Bit pricey to do this tho lol

 

[ALEXZ360]

Lol Thats What I Have Done Sam

Mine Is A 51mm 90 Degree Off The TB To A 51mm - 76mm 90Degree Then 76mm All The Way To The Air Filter

 

[phillpotts92]

How much in the end?

 

[ALEXZ360]

Around £55ish

 

[ALEXZ360]

Here Is The Print Screen Of My Order Plus £3.51 For Vaccum Hose That I Ordered Seperately

 

[phillpotts92]

What seller is that?

 

[phillpotts92]

You sure all that will work?

 

[ALEXZ360]

Its A Seller Called MRSILICONE And Yeh My Dad And I Worked It Out

 

[phillpotts92]

Yea mr silicon is who I'm getting it off. Mines come to £38.53 for all of it which isn't as bad as I first thought.

 

[phillpotts92]

My very Intrigate plans lol:

 

[ALEXZ360]

Lol Looks Similar To Mine, Only Difference Is Mine Has A 50mm Alloy Pipe Inside The Two 90 Degree Bends So That I Can Tighten The Coupling Over The Top Without Squashing The Silicone Pipe, And Then The alloy Pipe Goes Inside The 76mm Bend, And Then A Coupling To Connect The Filter And Alloy Pipe

 

[user1111]

how much were the alloys with tyres from the old red ibiza? and what size were they? thanks

 

[ALEXZ360]

I paid £150 for the alloys and £200ish for tyres, and they were 16's


Alexz360

 

[ALEXZ360]

Finally got my air filter sorted out

Also bought some used centre caps for my BBS but they need some TLC as they have seen better days, but apart from that, not alot has happened,


Alexz360

 

[blackmagicibiza]

Finally got my air filter sorted out

looks good. What size is the little breather filter? 9mm?

Thanx

 

[ALEXZ360]

that is the old breather filter in that picture, i dont actually know how big it is,

my new one is around 13mm i think, ill check and get back to you

 

[blackmagicibiza]

that is the old breather filter in that picture, i dont actually know how big it is,

my new one is around 13mm i think, ill check and get back to you

Have you got a link to the same one you have? Also where did you get the red hose from that it's attached to? Is that hose needed or can the breather just sit on top of the engine?

 

[phillpotts92]

Yes 13mm for breather filter and if you want the pipe just type in 10mm silicone hose and order 1M of it. Ideally the any air filter needs to be away from the engine but people have just plonked it on there. If your just plonking it on engine then you'll need a 10mm filter. (all dimensions ate inner diameter)


Sam.

 

[blackmagicibiza]

Yes 13mm for breather filter and if you want the pipe just type in 10mm silicone hose and order 1M of it. Ideally the any air filter needs to be away from the engine but people have just plonked it on there. If your just plonking it on engine then you'll need a 10mm filter. (all dimensions ate inner diameter)


Sam.

Thanks, have just ordered everything that I need, now just need to wait for it to all be delivered

 

[ALEXZ360]

yeh my new filter was 16mm due to the piping walls being thicker than usual