The plate actually replaces a valve which is bolted to the side of the cylinder head. This is where the secondary air is injected into exhaust port #4 (before the port leaves the head at the rear)
Just like this, Dave
No the Leon doesn't have that up-pipe, the valve is bolted to the head.
but on the Leon the plate bolts direct to the head (using the original gasket).
I have an LCR and I can't see where the SAI is at all. I know that on the LC it has a pipe that goes into the filter but there's no such thing on my car 
I have an LCR and I can't see where the SAI is at all. I know that on the LC it has a pipe that goes into the filter but there's no such thing on my car
TBH i didn't think the LCR had one.
Me either but DPJ, a member with greather knowledge about the brand than me, has thrown me a little. Now i'm worries that my car didn't come with one when it should have.
Deleted member 20376
Guest
yeah, i seen a few of the threads about the dv being the wrong way but my g/f bro had a mk4 cupra and he had his the same way as the pic but my lcr is different. he seems to think that the oem one came like that.
my lcr hasnt got the pipe off the airbox only the cold feed and the air intake.
my lcr hasnt got the pipe off the airbox only the cold feed and the air intake.
The best way would be to follow the pipe from the bottom of the air box down.
But as others have said, may bring on fault codes because of no air flow.
But as others have said, may bring on fault codes because of no air flow.
I think there must be one on the LCR because the other option is to much to bare.....DJP could be wrong.....noooooooooooooooooooooooooooooo 
I think there must be one on the LCR because the other option is to much to bare.....DJP could be wrong.....noooooooooooooooooooooooooooooo
See - even I can learn something!!!
I never knew - the LCR doesn't have secondary air.
(Sorry for misleading anyone
)
I never knew - the LCR doesn't have secondary air.
(Sorry for misleading anyone
)
Last edited:
Similar threads
