connor ibiza
Guest
Fancying getting a new induction kit, anyone who has one set up can you post some pics to show me how youve set up the cold air feed to it please. Wondering the best/sexiest/cheapest way
-
Hey Guest👍👎 We're looking for reviews of your local CUPRA or SEAT Dealership - it's quick and easy to do: Leave a review now
I haven't actually got an uprated cold-air feed to my open cone filter. I'm just making use of the standard snorkel that went to the original airbox. I guess yu could make the most of this and maybe fit some larger ducting? There is a mod where you can remove the "flap" inside the bit that is attached to the front of the car to allow more air in.
connor ibiza
Guest
1.2, guessing im gona need some silicon hosing too so it doesnt just sit vertical on my engine yeah?
The 1.2 has LOADS of room in the engine bay, I expect you could run one from the lower grill or foglight.
90% of the people on here who have cone filters or do these sorts of mods have 1.8T's or 1.9TDI's (FR CUPRA) problem is in those engines there is no room to run a cold air intake so most haven't bothered.
90% of the people on here who have cone filters or do these sorts of mods have 1.8T's or 1.9TDI's (FR CUPRA) problem is in those engines there is no room to run a cold air intake so most haven't bothered.
Here is a guys that doesn't really show up any more called mixups
1.2 12v like yours
And here's the link to his thread
http://www.seatcupra.net/forums/showthread.php?t=148871&page=4
Mine
How does that connect? I just had a quick look at mine and its all blocked off :S
This is on a 1.4 though, would I have to change the grills?
keep an eye on the forge section , as my kit ( the one at inters on my car) will be developed properly soon
Kris is that the set up that was on the 1.9tdi cupra at inters next to the tech's boc?
as i am really intrested in that set up.
But answering your question i would have thought running a section from the fog lamp would work well, there are those circular connectors that you can use (think it is on the pipercross cold air feed pipe) that will connect onto a lower grill or replace a lower fog light position.
as i am really intrested in that set up.
But answering your question i would have thought running a section from the fog lamp would work well, there are those circular connectors that you can use (think it is on the pipercross cold air feed pipe) that will connect onto a lower grill or replace a lower fog light position.
Last edited:
this would make our kit only for people willing to remove the fog light , which many people wont
the dcoop will be made properly when developed properly
the dcoop will be made properly when developed properly
sorry kris wasnt refering to the forge unit running from the fog light, was meaning a general cold air feed for the thread question.
was yours the tdi cupra with the forge system at inters, that system looked good cant wait to see when its available.
was yours the tdi cupra with the forge system at inters, that system looked good cant wait to see when its available.
Similar threads
