The scratch ripped the pad to shreads lol respray here I come , how's the engine cover coming along
-
Guest, New Stock alert: Premium CUPRA valve caps now available in the store ? Order now from the merchandise store
its going good...still taking it easy though still changing at 4krpm...But yeah its nice to have it back how deep the scratch?
Well after 8hrs each side its finally done the amount of preb work and time has been un-real...Now all thats left is the Roof,Spoiler,bonnet and Bumper now with these being the most flat surface on the car it will take alot more time to get it right as its full of scratchs and Overspray...
Also completed the wheels too so the list is getting sorter ready for edition38 in september...Im going to be renewing the rear discs and Pads next saturday then once there done il refurb the rear calipers same colour as the Brembo and stick my Spacers on....The paint isnt ''Perfect'' but without a entire respray we've done well im mean The ebony black makes it look wet all the time....
Some pictures but camera Phone is crap...
But after Edition Im looking in to Strut braces and Oil cooler and Baffled sump....
Also completed the wheels too so the list is getting sorter ready for edition38 in september...Im going to be renewing the rear discs and Pads next saturday then once there done il refurb the rear calipers same colour as the Brembo and stick my Spacers on....The paint isnt ''Perfect'' but without a entire respray we've done well im mean The ebony black makes it look wet all the time....
Some pictures but camera Phone is crap...
But after Edition Im looking in to Strut braces and Oil cooler and Baffled sump....
Last edited:
jamiebennett81
Guest
Get Em Done T
Ive done 200 miles now and just been speaking to alex its time to use more of the rev range and progress another 50-100 miles then drop the oil and get the millers put in for edition38..
Ive done 200 miles now and just been speaking to alex its time to use more of the rev range and progress another 50-100 miles then drop the oil and get the millers put in for edition38..
Should have a photoshoot at the NW scn Meet Matt..
Started my 3'' Stainless steel tip tonight its very simple todo Got some steel from my local Ironworks place for pennys....
1m 3'' 3mm Wall Steel
10'' 19mm Steel tube
4'' 25mm steel tube
4'' 6mm steel which is really thin...
and a Mates welder who is teaching me the art of mig and tig in...Photos to follow
Started my 3'' Stainless steel tip tonight its very simple todo Got some steel from my local Ironworks place for pennys....
1m 3'' 3mm Wall Steel
10'' 19mm Steel tube
4'' 25mm steel tube
4'' 6mm steel which is really thin...
and a Mates welder who is teaching me the art of mig and tig in...Photos to follow
Great Danny, its makes a huge difference on my car. Looking forward to your creation.
Cars looking great by the way.
Had some paint left over from the wheels so i got my mate to part these...got abit of paint left too...
tadaaaa diy smooth cover
tadaaaa diy smooth cover
Yes I can vouch for that I had one fitted for a while it's in my boot now , made the car over fuel a bit , used to pop bang and flame , and when I mean flame I mean at least 2 ft flames lol
I presume there is jump in performance in making a 3 inch tip over an uprated silicon tip, will look on in interest?
