-
Guest, 🎅🎄Looking for a stocking filler idea? Why not treat yourself or a loved one to our high quality CUPRA or SEAT valve caps. Order now from the merchandise store
Deej's mk1 LCR 225
- Thread starter rossi46
- Start date
im gutted got to the end lol.... fantastic work mate 100% enjoyable reading and best of luck with the project..........
I've been looking into fitting some h7r HIDs actually and it's ridiculous how many are on the market.
Where did you buy yours from?
Where did you buy yours from?
Thanks a lot guys for the kind comments.
They are off of eBay and from a company called honest hid people.
Not used them yet on the road so time shall tell how much difference they make. Looking forward to trying them though.
Stage 2 mk1 LCR 291bhp AmD tuned.
They are off of eBay and from a company called honest hid people.
Not used them yet on the road so time shall tell how much difference they make. Looking forward to trying them though.
Stage 2 mk1 LCR 291bhp AmD tuned.
The car is comming along nicely, great work and attention to detail.
Great solution for the silencer btw
Your engine by is really tidy and in great contrast with the red hoses.
I was wondering about the HIDs you guys in UK are installing. Is there no problem with the MOT or the police?
In Slovenia you have to have automatic beam adjustment and headlamp washing system installed, otherwise it can be extreemly costly if the police pulls you over and take a closer look.
Great solution for the silencer btw
Your engine by is really tidy and in great contrast with the red hoses.
I was wondering about the HIDs you guys in UK are installing. Is there no problem with the MOT or the police?
In Slovenia you have to have automatic beam adjustment and headlamp washing system installed, otherwise it can be extreemly costly if the police pulls you over and take a closer look.
To be honest it's the first set of hids I have ever used. Technically yes they should have auto level, projector lenses and washers if they are xenon but if the beam pattern is ok and it passes an MOT then there seems to be no issues. I have had no issues with people flashing me if I am dazzling them yet.
Stage 2 mk1 LCR 291bhp AmD tuned.
Stage 2 mk1 LCR 291bhp AmD tuned.
This is part of my service that I will be doing in a weeks time.
Powerflex polybush black series for wishbone front and rear, dog bone front and rear, steering rack, new lower ball joints and new bolts for the lot when fitted. Been tidying and cleaning them all up in preparation.
Masked up the wishbone bushes tonight after degreasing and wire brushing the wishbones clean.
And gave them a few coats of black hamerite to tidy them up.
Will paint the other side in the week.
Looking forward to getting all of this on.
Stage 2 mk1 LCR 291bhp AmD tuned.
Powerflex polybush black series for wishbone front and rear, dog bone front and rear, steering rack, new lower ball joints and new bolts for the lot when fitted. Been tidying and cleaning them all up in preparation.
Masked up the wishbone bushes tonight after degreasing and wire brushing the wishbones clean.
And gave them a few coats of black hamerite to tidy them up.
Will paint the other side in the week.
Looking forward to getting all of this on.
Stage 2 mk1 LCR 291bhp AmD tuned.
Painted the other sides of the wishbones now.
Then cleaned the dog bone mount up as best I could and fitted the small end and big end bushes and torqued it up all ready to fit.
Pretty much ready for the service Monday now which will consist of:
Oil, filter and pollen filter, drop the sump and change the pickup pipe.
Then fit wishbones and dog bone all with new black series polybushes, ball joints and bolts all round and a black series power steering rack bush.
Stage 2 mk1 LCR 291bhp AmD tuned.
Then cleaned the dog bone mount up as best I could and fitted the small end and big end bushes and torqued it up all ready to fit.
Pretty much ready for the service Monday now which will consist of:
Oil, filter and pollen filter, drop the sump and change the pickup pipe.
Then fit wishbones and dog bone all with new black series polybushes, ball joints and bolts all round and a black series power steering rack bush.
Stage 2 mk1 LCR 291bhp AmD tuned.
Right well today was a busy day with the service and other bits and bobs...
Black series powerflex bushes in freshly painted wishbones, same bushes in the dog bone front and rear, and also power steering rack bush to match. All new bolts and ball joints throughout.
Then oil, filter, pollen filter, dipstick tune and oil pickup pipe to change as well!
Stage 2 mk1 LCR 291bhp AmD tuned.
Black series powerflex bushes in freshly painted wishbones, same bushes in the dog bone front and rear, and also power steering rack bush to match. All new bolts and ball joints throughout.
Then oil, filter, pollen filter, dipstick tune and oil pickup pipe to change as well!
Stage 2 mk1 LCR 291bhp AmD tuned.
Then dropped the sump..
Oil totally clean and the magnetic sump plug didn't have a single bit of swarf on it. One tiny piece of metal in the pickup pipe but unsure where it's from .
New pickup and O ring bolted on...
And a shot of the bottom end...
Didn't photo everything but that's the bulk of the work. Greased the front pads as they were squeaking a bit when coming to a stop.
Now I just need to test drive it, let the bushes settle and get hunter wheel alignment done.
Job done for now
Stage 2 mk1 LCR 291bhp AmD tuned.
Oil totally clean and the magnetic sump plug didn't have a single bit of swarf on it. One tiny piece of metal in the pickup pipe but unsure where it's from .
New pickup and O ring bolted on...
And a shot of the bottom end...
Didn't photo everything but that's the bulk of the work. Greased the front pads as they were squeaking a bit when coming to a stop.
Now I just need to test drive it, let the bushes settle and get hunter wheel alignment done.
Job done for now
Stage 2 mk1 LCR 291bhp AmD tuned.
Top work as usual, Dan...
Seeing the state of your old w/b bushes makes me wanna go out in the rain and check mine!
Seeing the state of your old w/b bushes makes me wanna go out in the rain and check mine!
Thanks mate. That was the worst out of the two to be fair but the front ones were just as bad and a lot of play from the smaller dog bone too.
I'm looking forward to feeing the difference.
The rear beam bushes look knackered too but i think that's a axle off job to get it done properly. Big job
Stage 2 mk1 LCR 291bhp AmD tuned.
I'm looking forward to feeing the difference.
The rear beam bushes look knackered too but i think that's a axle off job to get it done properly. Big job
Stage 2 mk1 LCR 291bhp AmD tuned.
Good stuff man! Difference with fresh bushes all round is night and day, bet it feels way better with that lot bolted up.
Do you still have the old wishbones? A friend of mine is currently sticking LCR running gear on his Mk4 and they're the last part he needs - if the price is good I'll point him your way.
Do you still have the old wishbones? A friend of mine is currently sticking LCR running gear on his Mk4 and they're the last part he needs - if the price is good I'll point him your way.
Last edited:
Good progress, I may sound a bit slow, but what bushes are those in the wishbones, I just got brand new wish bones as the old bushes were shot at! And they don't Seem to have the outer bit on, trouble is I still have a knock.. cheers reg
Similar threads
