Dv and relocation kit fitted

[Lee Cupra R]

done the first mod today after work

Fitted the forge 007p and the relocation kit.

Happy with the way it come out. Only been out around the block to see if everything was tight, so will have to see if it makes a diffrence to the drive or not.

Not a bad start only had the car 3 days.

 

[MarkE]

Looking good.

Technically, you've got the DV reversed (have a think about how it was connected to the TIP before the conversion) compared to standard but it doesn't seem to make much difference, apart from a slight change in sound on some cars.

 

[Lee Cupra R]

Yeah i know, its they way they said fit it so just going to see how it goes.

Just waiting for the tip now

 

[G2232]

see i think it should help keep temp of egine down due to the fact you are no longer putting hot air directly back in to the tip which would usually happen

 

[Cupra Duper]

done the same mod on mine the other night. Now have a lot of whistle and lost boost in the higher gears. Checked all pipes where tight but going to have a good look tonight to see whats going on.

 

[BCM]

My DV is reversed, makes a noise like a mouse sneezing! (only louder!)
No relocation kit tho!

 

[Lee Cupra R]

Going to and from work today could not notice anything diffrent without the windows open then only a slight noise so i think i will leave it.

Fitted my dyna twist today need to play with the intake pipe a bit to get it to sit better but so far so good

Will have to give it a good wash and polish the weekend.