FAO K03s equipped ibiza owners

[cupra_matt]

After fitting the K03s a while back iam not convinced about the pipe which joins the turbo to the boost pipe which goes over the top of the engine (see pic) it seems a little big when put on the turbo outlet, the jubilee clip seems to have done the job but iam not sure how good the seal is, has anyone used a different pipe or got any advice?

Cheers.

 

[Shock_Xe]

and I know exactly why! Lol

Its cause the K03 originally fitted to your car doesnt have a silencer so the pipe used to sit further down the turbo, now it has a silencer it sits higher up

does it show I got the T-shirt

 

[cupra_matt]

You got the t shirt. Cheers mate. Is there another pipe that can be used?

 

[flashbsd]

i think somebody was looking at using a 51mm reducer silicon hose from forge, dead easy

I have an unsilenced one and have had no problems

 

[Olly20VT]

searchy searchy, iv got the same set up and my pipe kept coming off and i found this a grate help, thats what im running now.HERE

 

[cupra_matt]

Cool mate. Mine hasn't come off yet but will get one ordered, want tne car bang on.

Cheers for that.

 

[flashbsd]

knew it was olly!

 

[CupraPower]

i think somebody was looking at using a 51mm reducer silicon hose from forge, dead easy

I have an unsilenced one and have had no problems

Have you fitted yours yet?
Getting mine from A&M also

 

[Shock_Xe]

i just bought a samco straight reducer and cut to size, cost about £15 job done

 

[cupra_matt]

i just bought a samco straight reducer and cut to size, cost about £15 job done

what size reducer should i get then?

 

[Shock_Xe]

what size reducer should i get then?

the turbo outlet is 2", and I think the stock alu pipe going over engine is 2.25" so it will be a 2.25"-2" straight reducer but double check size

 

[Daz_gibbo]

So, been as I have the unsilienced, I assume I won't have this little problem?

 

[Martyn]

So, been as I have the unsilienced, I assume I won't have this little problem?

 

[cupra_matt]

This should do the trick.

http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=0022S&product=FMS57-51

 

[Olly20VT]

if you read the link i posted it will tell you the size you need for a silenced ko3s, wich is 54 - 48 reducerwich from forge the part number is S54-48 duno about unsilenced turbos.

 

[cupra_matt]

if you read the link i posted it will tell you the size you need for a silenced ko3s, wich is 54 - 48 reducerwich from forge the part number is S54-48 duno about unsilenced turbos.

Bugger i have ordered a 51mm - 57mm, will hav to ring them and get the right one.

 

[cupra_matt]

I cant find the 48-54mm listed on the website

 

[cupra_matt]

Olly, what size is the original pipe of the car, is the one i ordered gonna be too big?

51 - 57mm

 

[Olly20VT]

im sure that is right, try ringging them up and asking for one, if not just get the closes one you can, its all up to you, the one youv ordered will fit but just not as well IMO.
I dont know the size of the std pipe, i just went to forge and asked to try a reducer and we found this was a good snug fit on both parts then cut the pipe to length then just cliped it up

 

[cupra_matt]

Cheers mate.