fao

  1. Does anyone elses 1.4TSI squeak when prodding the accelerator?

    If you are traveling along in drive (D) at low rpm and give your accelerator a prod do you get squeak? I've never noticed it before until today. Doesn't sound very good! I'm sure i've read about techie having the problem.. Supercharger coupling??
  2. jnc90

    Reccomended Welsh Body Shop needed

    Not sure if this is the right area to post but just wondering if anyone could reccomend some decent body shops who don't charge the earth in the South Wales area, Cardiff, Glamorgan etc.... Looking to get some smoothing done! Cheers guys!
  3. problems with Xenons

    I have the bi-xenons on my new Bocanegra and they really are worth the premium.. Only problem is they have misted up already and it kind of ruins the black front with a white mist. Have yours misted up? Do I need to get some new ones through warranty? Shouldn't really be happening on a £650...
  4. FAO all PD130 owners

    Can you help me out by posting your Rolling Road graphs of standard PD130's and Stage1 PD130's please?
  5. anyone who knows about top mounts? help required

    Whilst drving my wifes 52 plate 1.9 Tdi today (after getting a fresh MOT ticket:doh:). I was reversing round a corner to turn round, this involved some gradient and full lock, I got a clanging noise, the noise a spring makes. I thought, bugger snapped spring as know this seems to happen on newer...
  6. Moffat

    Those "big mouth" cupra R bumper's

    I'm sure i've seen one or two on here, where the number plate has been moved, either relocated or made into a sticker, and they have the whole mouth of the bumper open. i took my plate off to have a look behind it, but found that there was the big lump of extra bumper behind the plate. How can...
  7. FAO all 1.6 Sport owners (past and present)

    Who's taken theirs on a 1/4mile strip? Where was it and what time did you get?
  8. sheffboy

    fao anyone with a supersprint exhaust

    I've been busy looking into various exhaust options for my LC and I'm thinking about going down the supersprint route due to the nice tailpipe design. I'm trying to decide whether to go for the non-resonated or resonated cat back or just to go for the back box. What are peoples opinions...
  9. Leon_MHX

    FAO anyone that has seen the underside of xenon headlight

    Could you please tell me what this connector is, i suspect its to do with auto-levelling?
  10. skahigh

    N249 and vac resevoir removed - spare vac connectors.

    I assume once you do this you end up with a few vac connections that have no hose attached to them. What do you block these up with?
  11. DanAPR225

    Stage 2 LCR owners...

    Hello, I have a stage 2 APR LCR, and it may be normal, but i have found that when driving normally, if you let the car come on boost (say foot 3/4 down) then back off ever so slightly, the car kind of comes totally off boost and roars from the exhaust if you get what i mean rather than a smooth...
  12. cupramillo

    Should new Forge FMIC have packet of bolts, screws, washers etc??

    Hi, i got a nice suprise in the post two days ago... my forge fmic:) Took everything out and everything was there apart from the fitting guide. Did a search on here and found it.....no probs there. Took eveything else out and it doesnt seem to come with any replacement bolts or anything. Am i...
  13. ::Paint fade:: Onvi yellow owners

    Help needed off yellow cupra owners... My cupra has a couple of panels on it that have faded / maybe been painted in the past. I need peoples opinions on whether you'd recommend having a cut an polish job done on it for £120 or having the whole car painted again in yellow??? Im not sure...
  14. cupramillo

    FAO Supersprint Exhaust Owners

    Hi, i have a supersprint back box only (oval tailpipe) and was after getting a blueflame sports cat and down pipe. After reading tthrough a few threads i noticed that i have to get the centre section also. Found a website called http://www.motorsportworld.co.uk/ and they sell the centre...
  15. FAO: ppl who fitted their own front upper strut brace

    Hi guys, I have now got my s3 strut brace ready to be fitted. I have searched and read the threads and different ways of fitting etc. However i'm thinking about attempting a different way. Rather than using nuts n bolts or rivnuts...I'm thinking of using a Tap and then just fixing a bolt into...
  16. FAO: LCR owners who have fitted a Catch Tank

    Hi all, I've been looking into how to fit a catch tank and have been searching for a couple of hours now, and come across a few useful threads, however the people who have done this mod generally speaking seem to have ibizas. This thread is the most useful...but still nothing for LCRs-...
  17. Guffers

    My vRS Wheels! FAO Ad!

    Not trying to upstage the grand master of course...... but here ya go! Its *nearly* possible to fit a mobile between the wheel and arch.... And just for good measure, i took my bucket seats out for the winter and made em into an office chair!
  18. chris27

    FAO aero wiper users

    mixed opinions in other threads so hoping this thread will make it clear to people like me, looking at getting a set, whether they are worth it or not.
  19. RikH

    FAO race cat owners, E M Light on....

    Had a quick search but couldnt find what i was after, but i do remember it coming up before Had a blueflame exhuast on with a race cat for about 1.5 month now. Scanned the car for fault codes about 2 weeks ago and it had bank 1 below efficiency threshold, obviously becuase of the cat. But no...
  20. FAO anyone who has changed there grill?

    I am interested in buying your old original one with the seat badge in it. PM me if your interested
Nimbus hosting - Based solely in the UK.