fitting a boost gauge is a task

[LEE69]

earth is the brown wire on the headlight switch, no need to go to the block.

 

[ADAM_84]

I thought there was two earths on it as one is on the engine block earth point and the other which i think your talking about is the one inside with i think two other earths going to it. Not sure though was a while back when i fitted it.

 

[LEE69]

All earths are interlinked, tap into the earth anywhere there is metal and a bolt even.

 

[StokieShinobi]

I tock mine off from the FPR

I've heard T'ing off the FPR can be a little risky as if there is a slight leak it can make the engine run lean without any notice which may cause damage

Confused now

 

[Lodgey180]

you will be fine with the t peice there mate.. there is 2 lines coming from the inlet one goes to fpr the other goes upto n249 valve.. either one of these lines will be fine

 

[D.K]

I've heard T'ing off the FPR can be a little risky as if there is a slight leak it can make the engine run lean without any notice which may cause damage

Confused now

I'v not had any issuse's with mine

 

[LEE69]

I've heard T'ing off the FPR can be a little risky as if there is a slight leak it can make the engine run lean without any notice which may cause damage

Confused now

Make the connections perfect, just like you would with anything on a car ie fuel/electrics.

 

[StokieShinobi]

thats where its going then - cheers ppl