Found some alloys that I really want to put on my LCR but they are a 50 offset.
Alloys are 5x100 18x7.5 with a center bore of 56.1
Thing is I can put 15mm spacers on to fix the offset but would prefer to get hubcentric spacers if possible, however the center bore on the LCR is 57.1. Is there such a thing as a 15mm hubcentric spacer with a 57.1mm center bore on one side and 56.1mm on the other?
Part of me thinks its only a 1mm difference so might squeeze on anyway or I could just use normal spacers.
Alloys are 5x100 18x7.5 with a center bore of 56.1
Thing is I can put 15mm spacers on to fix the offset but would prefer to get hubcentric spacers if possible, however the center bore on the LCR is 57.1. Is there such a thing as a 15mm hubcentric spacer with a 57.1mm center bore on one side and 56.1mm on the other?
Part of me thinks its only a 1mm difference so might squeeze on anyway or I could just use normal spacers.
Last edited: