Dommo7
Guest
Hmmm, I dont here anything from mine at the moment... Can you point me to the EXACT cone filter, as I just know I will get the wrong one... A 70mm Jetex cone filter?
The pic you posted was a red cone, which one is this mate?
The pic you posted was a red cone, which one is this mate?
This is the one I'm using, there's also a few other mk4 lads using it too http://www.halfords.com/webapp/wcs/..._productId_163573_langId_-1_categoryId_165660
I was amazed at the difference in sound a open cone filter made
I was amazed at the difference in sound a open cone filter made
As you're new, have a look in the 'for sale' section, you can normally fint induction kits and dump valves on there
Dommo7
Guest
also 'performance torque' who are highly rated on here are doing a special offer for 1.8 turbos on a remap with a pipercross panel filter for £225.
If you dont want the filter than you could just sell it
http://www.seatcupra.net/forums/showthread.php?t=243564
If you dont want the filter than you could just sell it
http://www.seatcupra.net/forums/showthread.php?t=243564
I'm running Performance Torque stage 2 map at the mo and had there stage 1 beforehand
whats BHP was yours before and after stage 2?
Dommo7
Guest
Where is P Torque? As I am from Colchester Essex...
Thats a great offer! Damoegan, would you recommened this company?
AMD in Essex claim they can give an extra 50bhp to my FR, would P Torque get the same results??
Thats a great offer! Damoegan, would you recommened this company?
AMD in Essex claim they can give an extra 50bhp to my FR, would P Torque get the same results??
P-torque is in Wolverhampton so probably about a 2 hour drive from u (i think!)
Dont be fooled by just bhp figures, normally on a stage one more bhp means less torque than another company.
Dont be fooled by just bhp figures, normally on a stage one more bhp means less torque than another company.
Yes, defo recommend them. Will real knows his stuff.
Stage 1 map will see circa 200bhp.
My stage 1 was a little low for a cupra at only 200bhp instead of ~210bhp but I took it back to Will and ended up coming away with a stage 2 map With all stage 2 supporting mods I made 237bhp and 267lb/ft.
Stage 1 map will see circa 200bhp.
My stage 1 was a little low for a cupra at only 200bhp instead of ~210bhp but I took it back to Will and ended up coming away with a stage 2 map
With all stage 2 supporting mods I made 237bhp and 267lb/ft.
FR has the same turbo...
Can't believe I've missed this thread so far... idiot!
To Dommo7: Have a look at my readers ride thread. I have a 150 FR (dyno'd at 158bhp) and have done some mods that you might want to have a look at (all the usual stuff mentioned already really....)
Dommo7
Guest
Similar threads
Model Year 20/21
Remap advice
