Going From A Remapped MK2 TDI FR To A MK2 Cupra Standard & Possibly Mapped Cupra?

[delboyuk2005uk]

Stage 2 costs around £1500 and you'll see around 320-330bhp

remap - £500
exhaust TB - £800-1000
intake - £150-£320

You dont really need an intake for stage 2 but i put it their anyway, me personally would save the intake until i had a hpfp and go straight for stage 2+.

There isnt really any comparison between the above and a derv Fr as loads more power but very similar tourque (350 ftlbs) but for longer in the rev range.

so what would a stage 2+ get then?

 

[delboyuk2005uk]

I am selling my Cupra, give me an email if you are interested

Just pm me some details about your car?

 

[delboyuk2005uk]

Stage 1 is great, and stage 2 plus is like stage 1 doubled imo. No idea what stage 2 feels like as I skipped it.

You can get 40mpg on the motorway if you stick to 60 and you dial down your settings once your car has been mapped

So how much is a stage 2+ and what do you get?

 

[RobH]

so what would a stage 2+ get then?

345-360bhp - 350-360ftlb its all really dyno dependant but at the end of the day its how it drives on the road which is ballistic and headline figures are boring pub talk tbh.

 

[delboyuk2005uk]

345-360bhp - 350-360ftlb its all really dyno dependant but at the end of the day its how it drives on the road which is ballistic and headline figures are boring pub talk tbh.

If I bought a standard cupra.

Can someone break down the cost of this

Cost of stage 1

Cost of stage 2

Cost of stage 2+

 

[RobH]

If I bought a standard cupra.

Can someone break down the cost of this

Cost of stage 1

Cost of stage 2

Cost of stage 2+

Stage 1 - £500 assuming Revo

Stage 2 - depending if you do intake now or at stage 2+ £1000 for Exhaust Turbo Back plus £50 for stage upgrade

Stage 2+ - £50 for stage upgrade plus £300 for pump and £350 for intake and £500 for IC.

This all depends what make of products you go for though so could be a bit more but also could be a bit less.

 

[SteveTDCi]

You Are going to spend more on fuel but my past 3cars have been diesel and although I spend more time in the fuel station I wouldn't change it for the world in fact I have no intention of changing it for quite some time

 

[P-torque.co.uk]

If I bought a standard cupra.

Can someone break down the cost of this

Cost of stage 1

Cost of stage 2

Cost of stage 2+

I remember you itching for more power!!

Drop me an e-mail if you want some idea of costs for the P-Torque packages.

Stage 1 is just £295.00 all in for SCN members, and this will give approx 305hp and 310lbs/ft torque.

As others have mentioned, we offer packages up to approx 355hp on this engine

 

[delboyuk2005uk]

I remember you itching for more power!!

Drop me an e-mail if you want some idea of costs for the P-Torque packages.

Stage 1 is just £295.00 all in for SCN members, and this will give approx 305hp and 310lbs/ft torque.

As others have mentioned, we offer packages up to approx 355hp on this engine

Thanks will but I need a cupra 1st. Currently still have the MKS TDI FR you remapped so far going well but use to the power now.

 

[delboyuk2005uk]

You Are going to spend more on fuel but my past 3cars have been diesel and although I spend more time in the fuel station I wouldn't change it for the world in fact I have no intention of changing it for quite some time

how many miles you do a week and spend on fuel on the cupra?