How do I fix this one

[SCupra]

Hi all

Just the other day I replaced the Y shape breather hose as it had a big split in it.
I thought everything was all fine but then, another hose split, the one under the manifold, I have hissing noise coming from the dipstick area.

My question is how do I get to this hose as I cant even see the split and it looks like a right old mission to change, is it best taking it to a garage and if so any ideas on cost.

 

[The MoffMeister]

well a picture may help so we know what hose you mean fella also the hoses under the mani arent hard to sort out if its hissing it shouldnt be hard to find

 

[caveo]

Its easyer from under the car , but still fidderly.

 

[SCupra]

I cant see what hose it is, all I know is that when I push the hose marked in the photo the hissing stops.


http://i510.photobucket.com/albums/s349/S_CUPRA/20082008635-1.jpg


Was wondering what I have to take apart to get to these hoses and how easy it is.

 

[The MoffMeister]

follow the end of that hose and it should come to a silver clip iirc then rip the clips off and pull pipe off and replace as ness

 

[muks11]

What hose is this and whats the best way to get to it. I think I have the same problem and the VAG-COM is showing the same error code 17544 - P1136 17544 - Fuel Trim: Bank 1 (Add): System too Lean. I can also hear a hissing sound in this area.

 

[ScoobyJawa]

You can get to it if you removed the dipstick bracket, bit tricky but doable. Hose is flipping expensive from the dealer though!