How To: Retrofit a heated steering wheel to a Mk3 Leon

[grabania]

The pins are mixed up like pin 1+2 are airbag pin 7 is horn signal and so on...

Would it be possible to just buy another clockspring? or can you point me to the right airbag part number?

You've got correct clock spring, but your airbag loom is not compatible with MQB/MQBEvo platform. AFAIK there is no separate part number for airbag loom so I see three options:
- you will look for airbag loom by searching "leon kl airbag loom" or "formentor airbag loom" and hopefully find one
- you will modify airbag loom that you've got, but it will require rewiring almost every cable
- you will order whole new airbag with correct airbag loom

Correct airbag number starts with:
- 5FA880201 - that's your best choice, well tested by community, but loom might need rewiring if airbag is from VZ5 trim (e.g. 5FA880201AR)
- 5FF880201 - refreshed version of previous number, same story about VZ5 trim
- 6F0880201 - Ibiza/Arona airbag, there are few numbers that will fit, don't know why they have separate part number

 

[Janiboyapple]

You've got correct clock spring, but your airbag loom is not compatible with MQB/MQBEvo platform. AFAIK there is no separate part number for airbag loom so I see three options:
- you will look for airbag loom by searching "leon kl airbag loom" or "formentor airbag loom" and hopefully find one
- you will modify airbag loom that you've got, but it will require rewiring almost every cable
- you will order whole new airbag with correct airbag loom

Correct airbag number starts with:
- 5FA880201 - that's your best choice, well tested by community, but loom might need rewiring if airbag is from VZ5 trim (e.g. 5FA880201AR)
- 5FF880201 - refreshed version of previous number, same story about VZ5 trim
- 6F0880201 - Ibiza/Arona airbag, there are few numbers that will fit, don't know why they have separate part number

Okay thank you for your effort and Information. Just to be sure will this Airbag fit Plug and Play?
Airbag Link

 

[grabania]

I was not able to get 5FF airbag to be 100% sure, but judging by photos wiring seems to be the same as in 5FA airbag for standard steering wheel (without start/stop engine and Cupra buttons). Short answer - it should by plug and play.

 

[cairus]

I personally just rewired everything in two retrofit situations. I bought the airbag very cheaply for that purpose.

 

[seatinsider]

so i got back here bc i can't seem to find a good tutorial on how to update and w firmware i need for my part ! first of all i used odis (not enginers) and i can't see the update or flash option, so i've done some more look up and some say my climate unit can't be updated, a least not without enginers odis ! but i am woried sick of messing smt up ! so again if someone have a link to some steps or have the patience to help me (first mod ever sorry if it seem obvious for the lots of you, i really tried to do it by myself) , it would be awsome !!! thx to all for helping me on this journey ! i have to give up this mod if it's not possible !

 

[Janiboyapple]

so i got back here bc i can't seem to find a good tutorial on how to update and w firmware i need for my part ! first of all i used odis (not enginers) and i can't see the update or flash option, so i've done some more look up and some say my climate unit can't be updated, a least not without enginers odis ! but i am woried sick of messing smt up ! so again if someone have a link to some steps or have the patience to help me (first mod ever sorry if it seem obvious for the lots of you, i really tried to do it by myself) , it would be awsome !!! thx to all for helping me on this journey ! i have to give up this mod if it's not possible !

You will Need ODIS-E for flashing and Flash files. You can get Everything from other sites, if you Need Installation Assistants I can help you.

PLEASE BE AWARE OF SCN Rules
Software & firmware: Uploading or linking to firmware, software packages, cracked diagnostic tools, licence keys or activation tools is prohibited. Discussion of updates is permitted, but files must not be shared.

 

[seatinsider]

You will Need ODIS-E for flashing and Flash files. You can get Everything from other sites, if you Need Installation Assistants I can help you.

PLEASE BE AWARE OF SCN Rules
Software & firmware: Uploading or linking to firmware, software packages, cracked diagnostic tools, licence keys or activation tools is prohibited. Discussion of updates is permitted, but files must not be shared.

I welcome any help thx very much ! I understand for the sharing and piracy policy ! I just need guidance to not flash the wrong firmware / keep settings and not bricking my HVAC .

 

[cairus]

I can Help remote if you have the HW and SW

 

[seatinsider]

I can Help remote if you have the HW and SW

I have, just need to ask again to take the computer from my friend (w do u use for the call? I'm not native english so my way of speaking is a bit bad ... Hope it doesn't cause issues) i will see if i can find a good moment for u ? Do you have any preferences ?

 

[cairus]

Anydesk for remote

 

[seatinsider]

Anydesk for remote

Everything ready for you ! Tell me when you are ok to do it !

 

[cairus]

When you have time?

 

[seatinsider]

When you have time?

Thursday (every week, it's my day off so your time is my time !) is best for me or sunday (this weekend) from 18h-22h (UTC +1)

 

[cairus]

We write tomorrow