induction kits and cold air feeds..

[jamest87]

i got a k&n in my 1.2 but never had a cold feed, never actually thot about it till today funilly enuf, and not thinking that all my induction kit is doing is sucking in hot air n making a noise, and drinking fuel, im gettin no performance enhancment because i have no cold feed, wheres the best location on the front of the beeza to run a feed pipe from?

i was thinking of taking the front right fog light out and putting it there..

 

[whittle123]

i got a k&n in my 1.2 but never had a cold feed, never actually thot about it till today funilly enuf, and not thinking that all my induction kit is doing is sucking in hot air n making a noise, and drinking fuel, im gettin no performance enhancment because i have no cold feed, wheres the best location on the front of the beeza to run a feed pipe from?

ive got a closed filter so it came with a cold air feed attached. best way i found is to route it down near the front fog on the drivers side. i had mine facing just behind the grill by got too worried bowt sucking up water that i just shortened it so it was facing down into the front of the arch that was it could still suck up cold air but the water ( obiously heaver) wont get sucked up! well that my theory anyway

as far as getting a cold air feed i got one of ebay. like this: http://cgi.ebay.co.uk/1Mtr-76mm-Fle...14&_trkparms=72:1689|66:2|65:12|39:1|240:1318.

but ive heard people simply going into b&Q and getting 75-80mm flexible ducting. just whatever you do. dont by the silver metal stuff off ebay cause it lasts 2 minutes and ends up cracking with holes in it and its also becomes a gr8 head conducter being metal so the air isnt cold anymore. lol!!!

 

[jamest87]

Only had my cone filter on a few weeks and i love it, the sound is great. Not bad for a cheapish Induction kit

that looks fairly straight forward to do then...

 

[jamest87]

just going off topic for a sec.. it milltek the only exhaust system for the fr?????

 

[Nath.]

smooooth

remove trumpets and flaps, fit pd160 intake and a green filter and you're good to go

 

[Clone]

What part is the trumped you all talk about. Would it be worth while removing my Pd130 intake and taking a bigger cold air feed ( if it fits ) down to my fog light?

 

[cupra.al]

smooooth

remove trumpets and flaps, fit pd160 intake and a green filter and you're good to go

see that big hole it clips on there. used to in that pic anyway.

 

[kriso]

How did you get yours that smooth, Nath? It took me ages to get the criss-cross bits on the roof of the box worn down.

 

[jamest87]

What part is the trumped you all talk about. Would it be worth while removing my Pd130 intake and taking a bigger cold air feed ( if it fits ) down to my fog light?

im going to get viper induction kit with a cold air feed and see what i can do.. I was going to take out one of the fog lights but someone said about getting water up to the filter!!!!