I got an Forge elbow (in blue) and Forge joiner for sale if anyone wants it. 20 quid delivered.
-
Guest, 🎅🎄Looking for a stocking filler idea? Why not treat yourself or a loved one to our high quality CUPRA or SEAT valve caps. Order now from the merchandise store
Jetex Cone Filters :)
- Thread starter TommyCupra
- Start date
ginger_fool
Guest
BTW - The joiner elbows are 135 degrees , and not 45 .
45 creates a tight V shape - a U-turn in fact .
135 degrees is the geometric equivilant of what's in all your photos . from TIP to MAF that is .
Check out this shop for the right elbows .
http://stores.ebay.co.uk/REGALS-Motorsport_W0QQ_trksidZp1638Q2em118Q2el1247
notice furthr into each degree section, the angles drawn , and picture your engine bay area from TIP to MAF .
This looks perfrct and long - 2 x 152 mm.
http://cgi.ebay.co.uk/70mm-OD-135-T...photoQQcmdZViewItemQQ_trksidZp1742.m153.l1262
45 creates a tight V shape - a U-turn in fact .
135 degrees is the geometric equivilant of what's in all your photos . from TIP to MAF that is .
Check out this shop for the right elbows .
http://stores.ebay.co.uk/REGALS-Motorsport_W0QQ_trksidZp1638Q2em118Q2el1247
notice furthr into each degree section, the angles drawn , and picture your engine bay area from TIP to MAF .
This looks perfrct and long - 2 x 152 mm.
http://cgi.ebay.co.uk/70mm-OD-135-T...photoQQcmdZViewItemQQ_trksidZp1742.m153.l1262
Last edited:
So is a straight piece of silicon hose called a 180 degree elbow? lol
Most companies (like forge and samco) label the elbows by the amount of degrees "off straight" the elbow is.
Most companies (like forge and samco) label the elbows by the amount of degrees "off straight" the elbow is.
Different companies give them different angles .
I'm just saying geometricly the joiner we need isn't 45 but 135 .
I'm just saying geometricly the joiner we need isn't 45 but 135 .
old thread bump, just to make clear as im ordering the jetex setup with the forge silicon tubing, what size does the bend have to be? Some say 45degree some say 135degree? Can anyone clarify?
Not going to buy mine from forge as they only do blue! Going to get the elbow from SFS performance as they can do red pipes
In keeping with my colour scheme!
In keeping with my colour scheme!
Any Pics of engine bays with these fitted. pref with blue pipes please as im looking to order one today =]
:sorry for the dumb question but will this defo fit mine ?
160mm
140mm
150mm
CENTER
320
CHROME
FC-07003
with a 70mm neck size as it was the neck size i not 100% on thanks
160mm
140mm
150mm
CENTER
320
CHROME
FC-07003
with a 70mm neck size as it was the neck size i not 100% on
thanks
Just ordered an FC-07003, 45deg 70mm hose and joiner
How long did it take to be delivered?
Lol next time just read the thread
i did read it hence the info is correct i just wanted to be sure! as there was 3 different FC-07003 ! but thanks for clearing it up guys!
what shape would you say is best for fitment ? Cylindrical Filters or Conical Filters as in one you cant get a chrome top only rubber but seems like most ppl went for Cylindrical Filters ?
Mine arrived Friday, got the filter from Jetex, and the Samco hosing, hose joiner and clips from MerlinMotorsport.
At the moment just fitted the filter on the end of the MAF, as the samco hose elbow looks like its gonna need a fair bit cut off it as it's a very tight fit in that engine bay!
At the moment just fitted the filter on the end of the MAF, as the samco hose elbow looks like its gonna need a fair bit cut off it as it's a very tight fit in that engine bay!
Similar threads
