Lets see pics of your RamAir filters...

[Simon L]

Woops, my bad. Thanks Bill.

 

[Simon L]

Got it Bill. Fits like a treat now. Thanks!

As standard for the Ibiza, this elbow should come as standard. Even though the engine bay is tight like you say, and it will end up rubbing against something, i would rather it rub against the battery, than rub THROUGH the coolant bottle.

 

[ibizacupra]

I can sort a silicon elbow 45 degree if available and 70mm coupler as extra's for ibiza's.

 

[Simon L]

Would be good to suggest it to the customer in the future, now you know.

 

[ibizacupra]

aye... additional flexi is offered as an upgrade on the std offering.... elbow can be added... but it all adds up in the price and not everyone opts for the extras.

 

[DPJ]

Bill, could you do me a straight length of hose and a coupler so my RamAir is no longer directly connected to my MAF?

 

[ibizacupra]

Bill, could you do me a straight length of hose and a coupler so my RamAir is no longer directly connected to my MAF?

What length and 70mm I presume for you, hose size etc

I can get Forge's Siliconhose.com plus coupler or Greens rubber hose & coupler
thinking siliconhose.com is blue, rubber hose being black.

regards
bill

 

[DPJ]

What length and 70mm I presume for you, hose size etc

I can get Forge's Siliconhose.com plus coupler or Greens rubber hose & coupler
thinking siliconhose.com is blue, rubber hose being black.

regards
bill

LC MAF. A coupler, a jubilee clip and 4" of your finest straight blue please, oh purveyor of quality tuning gear.

 

[DPJ]

:bump:

 

[ibizacupra]

LC MAF. A coupler, a jubilee clip and 4" of your finest straight blue please, oh purveyor of quality tuning gear.

yes yes yes.... patience..
will get pricing monday

It will be silicon hose and Aluminium coupler for info.

 

[DPJ]

yes yes yes.... patience..
will get pricing monday

It will be silicon hose and Aluminium coupler for info.

Thank you! No rush!

 

[RALF]

Got it Bill. Fits like a treat now. Thanks!

As standard for the Ibiza, this elbow should come as standard. Even though the engine bay is tight like you say, and it will end up rubbing against something, i would rather it rub against the battery, than rub THROUGH the coolant bottle.

have you a picture of the setup now.

 

[ibizacupra]

Thank you! No rush!

okeys..
here ya go...

70mm coupler hose in blue is £4.75+vat and is 75mm long with req'd ally coupler is £6.99+vat plus clips

updated in this thread. http://www.seatcupra.net/forums/showthread.php?t=53727&page=17

 

[DPJ]

70mm coupler hose in blue is £4.75+vat and is 75mm long with req'd ally coupler is £6.99+vat plus clips

Bill, I was trying to introduce a little bit of 'flex' between MAF and RamAir which is why I said 4".

When it's fitted together, how far down the hose will the ally coupler 'project' ?

 

[ibizacupra]

Bill, I was trying to introduce a little bit of 'flex' between MAF and RamAir which is why I said 4".

When it's fitted together, how far down the hose will the ally coupler 'project' ?

ally coupler is 70mm long too so there scope for adjustment there too.

 

[DPJ]

ally coupler is 70mm long too so there scope for adjustment there too.

You mean don't insert the ally coupler fully into the hose, Bill? Say 25mm in the RamAir, 25mm in the hose leaving 20mm coupler exposed?

 

[DPJ]

No rush, Bill.

 

[ibizacupra]

You mean don't insert the ally coupler fully into the hose, Bill? Say 25mm in the RamAir, 25mm in the hose leaving 20mm coupler exposed?

coupler can be inserted as long or not as you like into the silicon coupler.
so yea, your example works.

collecting couplers when I get a spare min and forge are open at the same time. (tomorrow likely)

 

[DPJ]

coupler can be inserted as long or not as you like into the silicon coupler.
so yea, your example works.

collecting couplers when I get a spare min and forge are open at the same time. (tomorrow likely)

Yes please then. (and thank you)