lowering and wheel question?

hankboi

Guest
i don't no what to do with lowering my car and putting wheels on!

i want a nice set of 17inch alloys for my ibiza 2000 1.6s so is there any point in lowering the car because i dont want rubbing to start in the wheel arch or should i just lower it and get a set of smaller wheels, please help as i dont really no what to do!

thanks!
 

Daymo

Low and Slow..
Jul 22, 2008
428
0
Scarborough/Sheffield
why dont you just get a set of cupra wheels and a set of coilovers, then you can just adjust them if it starts scrubbing at the back. what 17" wheels are you after?
 

hankboi

Guest
.

not sure 2 be honest im just having a shop around! how much can u geta set of coilovers these days?
 

Daymo

Low and Slow..
Jul 22, 2008
428
0
Scarborough/Sheffield
it all depends on what your after, you can be cheap ones which will lower it to the ground but the ride might be a bit harsh for like 200 quid off ebay, or you can go all out and spend nearly a grand on some mental ones :) its all upto your budget and preference really mate
 

hankboi

Guest
wow thats opened my eyes a bit more, that was a real good write up. ill have a think about it and come back to you guys when i no exactly what i want to do, and have had a bit more shop around!

cheers guys!
 

antnee

Guest
Ive got some TA Technix coilovers (180quid from ebay) and the ride isnt that hard, unless they are wound most of the way down. I did have them with about 30mm left (front wheels scrubbed, 15's) and it was really hard, moved them upto about 50-60mm left and they are fine!