Mk3 Ibiza 1.8 20vt induction kits

[henryg]

I currently have a pipercross viper induction kit which I believe has killed my MAF sensor. What induction kit should I go for instead ?

Cheers

 

[__B3NNY__]

www.jetex.co.uk

ER-07002 is the one that i have mate alot of people use them on here without any problems, as i said in my tx its a nice touch to order the joiner and elbow from forge/ebay and bring it nice and close to the wing.

You`ll also want one of these :

http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=0022HJ&product=FMHJ70

and one of these :

http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=0022A45&product=FMA45-70

 

[cus]

cheers for listing everything.i'm going to buy the forge parts as well

 

[M87NER]

I used to run a Pipercross Viper-killed 4 mafs before i changed!

 

[henryg]

Cheers for your help mate. I got a new MAF today. Going to get rid of my Viper induction kit before I fit the new MAF lol. I will give you a shout and let you know how I get on.

 

[nogutsnoglory]

what benny said

 

[__B3NNY__]

Cheers for your help mate. I got a new MAF today. Going to get rid of my Viper induction kit before I fit the new MAF lol. I will give you a shout and let you know how I get on.

No problem mate, hope it sorts it.

I did try and send that "thing" last night but my ac adapter has completly had it now (using home PC) ive ordered a new one so as soon as it comes ill email it to you.

 

[henryg]

No problem mate, hope it sorts it.

I did try and send that "thing" last night but my ac adapter has completly had it now (using home PC) ive ordered a new one so as soon as it comes ill email it to you.

Ok mate, no worries. Did you say 70mm for the neck size and its a conical filter, right ? lol. Just wana be sure

 

[__B3NNY__]

Indeed...

 

[henryg]

Right I have ordered all of the above... just gotta wait for them to arrive !

 

[Swordjo]

Think I may try this setup too as i'm not happy with the noise of the dynatwist.. or maybe go for this and stick the jetex filter down in the arch:http://cgi.ebay.co.uk/COLD-AIR-INDU...14&_trkparms=72:1301|66:2|65:12|39:1|240:1318

 

[Wastegate86]

just recieved one of those ^^^^
little worried it'll be a bit of a pig to fit though

 

[cus]

gonna get one of those ordered instead! once i relocate my battery to the boot

 

[__B3NNY__]

Very tight fit IIRC if your still running a SMIC.

 

[cus]

good opportunity for those SMIC people to upgrade

 

[SeatR]

Think I may try this setup too as i'm not happy with the noise of the dynatwist.. or maybe go for this and stick the jetex filter down in the arch:http://cgi.ebay.co.uk/COLD-AIR-INDU...14&_trkparms=72:1301|66:2|65:12|39:1|240:1318

i just ordered this myself, have smic. but wonders if the neck size on the filter remains 70mm with this kit?

so i can still juse a jetex 320bhp 70mm with this CAI? anyone know if the filter fits behind the arch?

 

[M87NER]

i just ordered this myself, have smic. but wonders if the neck size on the filter remains 70mm with this kit?

so i can still juse a jetex 320bhp 70mm with this CAI? anyone know if the filter fits behind the arch?

I think that jetex filter wont fit behind the arch tbh, mine only just fits and my filter isnt as big as the jetex, but it is still 70mm kit.

 

[Myki da Pyki]

Should have ordered the jetex ER-07505 filter, much bigger than the 07002

 

[SeatR]

I think that jetex filter wont fit behind the arch tbh, mine only just fits and my filter isnt as big as the jetex, but it is still 70mm kit.

okey what filter do you have ?

and how is it driving in rain and such with the filter so close to the ground ?

 

[cus]

i've decided to take bennys advice and get the elbow from Forge. only problem is the website wasn't working, so got some off ebay instead. also thought i'd splash out and get a TIP as well cant wait to get cuts and bruises from it, but will be worth it in the end