If the width is different you will need new subframes - common prob when putting aftermarket seats in cars. I nearly bought 2 Recaro Speed seats for my Glanza until I found out the subframes were just as expensive as the seats!
If the width is different you will need new subframes - common prob when putting aftermarket seats in cars. I nearly bought 2 Recaro Speed seats for my Glanza until I found out the subframes were just as expensive as the seats!
M10 splice screwhead at each corner of the rails at the bottom of seat. Undo these and take out seats- easy. If you have side airbags you will have to disconnect the batttery before you unplug the airbags themselves so that you dont get the airbag light staying on!
Interested to see how you get on mate, post pics when finished!
any tool shop or place that sells tools http://cgi.ebay.co.uk/Bergen-Hex-To...tZUK_Hand_Tools_Equipment?hash=item19bb158aa9 thats what you need if you want the whole set your be able to take your bumpers off and alsorts or your car with that set.
or you could buy the individual bit needed.
im assumeing you have a ratchet or t-bar as your need one with that set.
Thanks so much for the support and help, guys! Finally got the seats in, they're beautiful. A lot of fuss about nothing, to be honest! They fitted perfectly!
Posted the pics in my member's ride thread, check it out!!!!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.