my03 to lcr bumper conversion
- Thread starter bigjode
- Start date
Lcr Front Bumper
IVE GOT A LCR BUMPER ABOUT TO BE DELIVERED TO MY HOUSE TO REPLACE MY LC TDI FRONT BUMPER...
JUST CHECKING WITH U GUYZ WHAT I WILL NEED TO FIT IT TO A 04 CUPRA TDI, PRETTY SURE IM GONA HAVE TO ORDER THE GRILL SET
(CHAP ON EBAY WANTS £50 FOR ALL GRILLS - IS THAT GOOD PRICE)??
IVE GOT A LCR BUMPER ABOUT TO BE DELIVERED TO MY HOUSE TO REPLACE MY LC TDI FRONT BUMPER...
JUST CHECKING WITH U GUYZ WHAT I WILL NEED TO FIT IT TO A 04 CUPRA TDI, PRETTY SURE IM GONA HAVE TO ORDER THE GRILL SET
(CHAP ON EBAY WANTS £50 FOR ALL GRILLS - IS THAT GOOD PRICE)??
All the grills ?
Thats a very good price. Fogs are just under a tenner - the centre grill's about £45 IIRC and then you'd need the two by the lights (which are one piece, but not sure how much it is) and the S grill which is £17
Couple of bumper guides, and you're done - bar the foglights (£180??)
...and wheel arches if you want to do it properly, but the existing ones can be trimmed to suit
Thats a very good price. Fogs are just under a tenner - the centre grill's about £45 IIRC and then you'd need the two by the lights (which are one piece, but not sure how much it is) and the S grill which is £17
Couple of bumper guides, and you're done - bar the foglights (£180??)
...and wheel arches if you want to do it properly, but the existing ones can be trimmed to suit
Last edited:
yea it does look good in blue!
bigjode... please please PLEASE... chop down ur front number plate... it will still be legal as long as there is about 6mm of number plate either side of the first and last character!
will look 10 times better and cost u nothing if u have a junior hack saw and some sandpaper!
This has been done! And i totally agree it does look 10X better - see my avatar!
no you were right - the plates not legal anyway, so the size doesn't bother me too much. I don't seem to get any grief for it though (touch wood) and i've had it nearly 3 years now and been pulled for various other things without the plate being mentioned. one copper even said he liked it
I didn't find them to be that different putting an LCR bumper on the Toledo
Granted, the arch liner doesn't touch the very bottom of the indent on the back of the bumper, and the radius is slightly different ... but I've done 1,200 miles now (and a light bump) :blush: and it's not fallen off
Does anyone know the part numbers for the black plastic mouldings that sit around/behind the foglights ? Not the grills, but the bits towards the back of the bumper (holds the temp sensor on the n/s)
Granted, the arch liner doesn't touch the very bottom of the indent on the back of the bumper, and the radius is slightly different ... but I've done 1,200 miles now (and a light bump) :blush: and it's not fallen off
Does anyone know the part numbers for the black plastic mouldings that sit around/behind the foglights ? Not the grills, but the bits towards the back of the bumper (holds the temp sensor on the n/s)
James you still got a small plate fetish
Must admit it would look better jode cut down like mine
Must admit it would look better jode cut down like mine
as Damo knows 
...
... id cut urs down a bit more fella!
cut it down so the plate is the same size as the rectangular bit it sticks too! (this is assuming you can, looks like u should have no probs in doing this!)
...James you still got a small plate fetish
... id cut urs down a bit more fella!
cut it down so the plate is the same size as the rectangular bit it sticks too! (this is assuming you can, looks like u should have no probs in doing this!
)Similar threads
