New colour calipers and badge :)

[Razor]

Well decided earlier they needed a different colour
Got me some spray. ( miami blue )

Took about a hour roughly with afew coats.
Also done the badge, but it needs the lines done black to define the S
Will get that done tomorrow



All comments welcome !

 

[turbo009]

calipers look nice! Look forward to seeing finished results on badge tho

 

[cuprachrissy]

calipers look sweet pal, not sure on the badge but might be an interesting little mod!

 

[Razor]

Cheers !!
Unfortunately I snapped one of the wheel nuts when tightning back on
Getting a new one tomorrow all being well.

Yeh, I agree the badge needs done.
Its almost an exact match on the blue "GB" tab strip on my pressed plates so kind of goes well

 

[Dan1.6]

you thinking of doing the rear S badge what about some blue side repeter covers? not sure about them though

 

[kyle'87]

Looks really good the badge mate, wwant to maybe do mine this weekend but with a little twist lol

did you key the chrome surface before spraying?

 

[markmeus]

Nice to see calipers that aren't red!!!

Looks good.

 

[cuprachrissy]

Might do mine baby blue to match my new wheels

 

[dubz_wm]

you decided to keep them baby blue then chris?

 

[Mat]

not liking the badge so far TBH!

calipers are certainly different

So what happened to all the Gurkhas'? Do they get the right to live in the UK?

 

[Reuvers]

Might do mine baby blue to match my new wheels

are we ever gonna see them on the car??

 

[cuprachrissy]

are we ever gonna see them on the car??

haha, yer you will but patience is a virtue! should be all good this weekend. took my passenger wing off yesterday but cant line it back up, seems to be a gap between door and wing now .

 

[cuprachrissy]

you decided to keep them baby blue then chris?

yes for now but will be doing them red or forge blue soon, might get matching roof too.

 

[Razor]

H E L P


Cheers for all the comments people.
Well i got a new bolt sorted today .
Only thing is the one that snapped is stuck completely in the "disc hub" area.
There isnt even any length left for pliers to get at it !!
Is there anyway of getting this out at all ?

Im reluctant to drive with just the 3 bolts holding the wheel on.

HELP !!! lol

Heres a edited pic to show the area in question

Cheers

 

[Razor]

@ Mat
Zoom in on the pic to read about the Gurkhas lol

 

[Razor]

Bumpo !!

 

[EZ Tutty]

you could try using a punch and hammer to spin it out bit by bit untill there enough to get some pliers or something on it.

or try and get your hands on a set of easyout's

 

[Ricardo_Smooth]

take the disc off, should give you more thread then.

 

[Dan1.6]

you'll be fine to drive it with three nuts holding the wheel on and if you get a smaller drill than the bolt size then can drill it out and re-tap it

 

[Razor]

If i drill directly into it will it eventually just loosen and come out ?