Not Holding Boost?

Beaker™

Slightly Unhinged........
Nov 21, 2005
1,900
0
C:\UK\Glos
What boost should my car be holding with REVO?

Swapped the boost gauge today for a different one which happens to be in PSI not BAR. Boost shoots straight up to 20psi, then drops quite quickly to around 12psi, this right?

As i'm sure the car was holding boost alot better before today. Feels different too, seems to run out of steam big time at around 5k?
 

dannyk

leon cupra
Oct 3, 2004
478
0
Aberdeen
Don't know what a revo'd lc should give you boost wise, but if i feals alot diff after you've fitted a new boost gauge, maybe you have a leak somewhere? make sure all conections are real tight and secure.

What were the 'readings' from the other gauge (BAR) b4 you changed??

12psi = 0.8 Bar
20psi = 1.4 Bar

Cheers

Danny
 
Last edited:

dannyk

leon cupra
Oct 3, 2004
478
0
Aberdeen
Shifty-Shifty said:
Mmmm, i used all the existing piping so should be a leak there?

Maybe on the back of the gauge? or maybe a faulty one?

Maybe worth trying the other one (BAR) back in for a run to see what like.


Cheers

Danny
 

Beaker™

Slightly Unhinged........
Nov 21, 2005
1,900
0
C:\UK\Glos
Its an Ibiza Cupra, just put the old gauge back in and at 1st it was still doing the same thing ie shooting up to just over 1.5bar then dropping quite rapidly to around 0.8bar :( But after driving 30mins it seems ok. So maybe the gauge was at fault i don't know.

Seems to be holding between 1.0/1.5bar now in 3rd 4th & 5th. Drops off quite quiclkly in 1st & 2nd though, but thats normal right?
 

Beaker™

Slightly Unhinged........
Nov 21, 2005
1,900
0
C:\UK\Glos
acidstrato said:
yeah drop off at around 5k is normal, although after having the forge TIP fitted today, the drop off isnt as noticable as it was

So it seems as everything is as it should at the mo. This is good :funk: Will see what happens over the weekend :think:

Cheers guys :)
 
Progressive Parts, performance parts and tuning specialists