i have porsche fit bbs on mine. get alloy adapters rather than steel if you can. i machined my adapters to get perfect offset, but not everyones as fussy as me! 20mm should do but it really depends on the et number of the design 90s. i got mine on ebay.
I had D90's on my car up till last week
8" wide at bk et52 with 25mm adaptor et27
7.5" wide front et65 with 30mm adaptor et35
http://www.seatcupra.net/forums/showthread.php?t=86415
Now got porsche BBS's but need to know if they clear brembo's at front
8" wide at bk et52 with 25mm adaptor et27
7.5" wide front et65 with 30mm adaptor et35
http://www.seatcupra.net/forums/showthread.php?t=86415
Now got porsche BBS's but need to know if they clear brembo's at front
mine easily cleared the brembos, but i have a higher disc offset on the brembos than most. have been tempted to try the standard discs to see but never got around to it.
et62mm would need 25mm adapter to match et37mm but bear in mind a lot of people are already using a 15mm spacer on the rear of their ibizas to get correct offset. my fronts are 8 inch, my rears 9 1/2 but with reduced inner rims making them an actual 7 1/2 inch with high offset. think my ets were 50 isg but obviously ive messed with that by changing the inner rims.
My rears are et36 before adaptors,got a pair of 20mm adaptors that am goina get machine'd to 15mm so rear et will be 21 after adaptor.Will work it all out next week when BBS's arrive just planning on getting brembos,Supose they should fit as they porsches come with brembos.
porsche have very inboard discs though compared to ibizas. just watch as the allen headed bolts in the spacers will stick out past the spacers now or if you machined the inside edge the seats might be very narrow. i took 2mm off one face and 3mm off the other.
Deleted member 9043
Guest
Similar threads
