Rear wiper not working

[venner]

Hey

Bought myself a X reg Cupra last week and the rear wiper doesn't work.

Ive searched through the forum but couldn't find anything that could help.

Has any1 any ideas what i could do to try and make it work?

If not i will have to remove it but would like to keep it really.

Thanks for your help

Chris

 

[Mat]

or you could just remove it

I have 2 spare in my shed LMAO

 

[s1l3nc3r]

fuse, motor, loose conection...

Just remove it...

 

[venner]

Ok will check the fuse and if thats no good will pop to halfrauds and get a 25mm bung and remove the wiper.

Off the top of your head what fuse number is the rear wiper?

Thanks

 

[Riko]

Remove the boot lining and check the cables, I left mine unplugged by accident! I've removed it now as we shouldn't be needing it this time of year.

 

[s1l3nc3r]

Oh and if u do remove it make sure u either block off the end of the fluid hose from the boot...or take it off from the washer bottle in the engine bay just incase u knock it by accident...

 

[venner]

Just been to halfrauds and got the blanking plate and some rain X so will get it removed in abit i think

 

[venner]

All removed now ive taken pics aswell so will make a guide later on to help any1 that hasnt done this yet.

1 last thing any pics of what pipe i need to remove in the engine bay to stop the water going to the back by mistake? I have bunged it up but want to be double safe.

 

[s1l3nc3r]

just remove one and try the front washer if it doesnt work then you removed the wrong one if it does then your all fine and dandy...

 

[venner]

Any pics of where abouts on the bottle the bits to remove are?

 

[venner]

Also a tip to stop some of the boot rattles get 2 normal car washing sponges and cut them in half then wedge them in the little holes that you need to remove to access the rear bulbs in the boot.