Recent code read, Mk3 Cupra

[JB!]

scanned my codes, got:

17987 - Throttle Actuator (J338): Adaptation Not Started
P1579 - 35 - 10 Intermittent

16486 - Mass Air Flow Sensor (G70): Signal too low
P0102 - 35 - 10 Intermittent

Readiness: 0000 1001


and:

01463 - Alarm Triggered By sensor for anti-theft alarm system - 35 - 10 Intermittent

recently unplugged & re-plugged MAF and bypassed N249 to see if that solved boost problem, it did, and the guy at motech had a play witht he throttle body settings on friday...

cleared codes, can re-scan tomorrow, but any ideas on the 1st and 3rd code? i theink the MAF is just me cocking about.

 

[BeartheBruce]

They are all intermittent codes. I'd just clear them and see if they return. If they do, then I would begin troubleshooting. My guess is they are nothing based on what you have said.

 

[JB!]

the alarm one keeps coming up... nothing else at the mo.

 

[BeartheBruce]

The intermittent nature of the fault would lead me to look for a connection issue. On further investigation, this fault may mean nothing. Take a look at the write up in the Ross-Tech Wiki:
http://wiki.ross-tech.com/index.php/01463

 

[JB!]

thanks.

i seem to have developed some boost issues, which No. measuring blocks do i need to record?

 

[tarzan]

115 and 118 i think it was