Removing the inner metal door card

[RichieRich]

should we just make a tread of who wants what bhp and what they think they will need to get it to that? lol insred of hijacking this one? :s

 

[Ad Lav]

I think you shoudl drill out the bolts and get new ones Guinness

 

[Guinness]

didnt use an incorrect bit its just dam near welded in mate.

 

[Guinness]

iv got a new bolt as well stole me some good n propper lol

 

[rashcupra]

mole grips will get them out definatly! they do have blue lock tight on them so maybe the 1 you cant get out has got more on and has seiesed in a bit! wouldnt drill it out as it will take ages on a cordless drill and will eat about 5 drill bits! and you would also have to re tap the thread in the catch unless you have a new 1?

 

[Guinness]

sorted mate, mole grips and a flat head in in did it. Also got a new door card on but dont have door pins anymore lol

 

[Rosco906]

guinness u did what i did.

Broke the clip which holds the lock carrier on

Still havnt fixed mine. Not had time to go to scrappy's

what side did u break?

I broke drivers.

I was thinking about taking it off and maybe fire a weld on it. doubt it'l work but havnt had time recently.

Did u do the pic's for me also?

 

[rashcupra]

that plastic bit just locates the catch in position to get the bolts in not REALLY needed just more fiddly when removing/replacing it

 

[Guinness]

mine didnt break, it more just pushed off so I put it back on lol (dont undo the screw 2 much lol). Im off to the breakers again tomorow or the day after for some blank plated for the door pins and some screws lol.

 

[Rosco906]

yeah but when u tighten it up, the lock itself can still come out

unless your on about a different bit. Im on about the bit i broke ages ago lol which u said i'd broke it lol

I broke the bit that holds the lock carrier in, the bit that pings off if u unscrew it to far

Fancy getting me one lol

 

[Guinness]

o and rash wehre on about the metal ring around where the lock barrel goes in, if you nock it when yo put it in and the screw is a fraction too loose it breaks . Dont understand what bit your on about really, but if I see one I will be sure to steel it for u matey. Iv got a spare lock mechanism, will take a picture later and see if its the bit your on about.

 

[Rosco906]

its the bit that holds the lock in, u know how u unscrew the small torx, that bit which has the clip on it is the one i broke.

i unscrewed it to much and it fell off.

Nab me one if u can matey

 

[rashcupra]

you only undo the handle (gold 25 torx) untill it gives off a little resistance then the barrel will pull straight out. make sure you have the handle in open position when losening

I WILL MAKE A VIDEO! AS ALOT OF PEEPS NEED 1 I THINK!

and the title will be

*HOW NOT TO FCUK A DOOR*

 

[Guinness]

yer lol. nah it wasnt that mate the cover for the barrel I bought was f**cked so it didnt go in properly hence I batterd it in. I think the handle is a T15 as well mate. Also see why you do the handle now so that it keeps attached to the platic bit lol

 

[Guinness]

will do matey, know exactly where they have one. I will just claim u the whole insde of the door lock.

 

[Rosco906]

mint lol

got pic's of rhe car yet?

also did u get ma pic's or did u forget?

Just need to get car ready for jan ifi sell it again lol

Close 2 buying my own place

 

[Guinness]

not yet mate, going back out in a moment 2 get a pic, just got the car back charged up

 

[Guinness]

think thats what you mean mate

(a broken 1 I stole to compare and work out how to fix mine), I can get one of those on friday for u if you want matey and post it to u

 

[Rosco906]

err, i duno if thats it.

i'l take 1 anyway just incase it is.

Just looking to see where the small torx bolt goes back into to hold the lock in.

If thats what holds the lock bit in then iys what i need

 

[rashcupra]

you need the cage handle mechanism on the inside of the door skin that HOLDS the handle in position and operates the leaver motion

the pic that guiness has posted up is what i think you needed rosco as the gold screw is in the bottom right of the pic

is the one in the pic guiness the broken 1 or your new 1?