Seat Cable Clutch conversion part

[Chrisdaman]

i've managed to get hold of an 02A gearbox, but i need the clutch conversion from hydraulic to cable. usually on the ABF engine'd cars

Theres a part you can get from Seat Dealers

any help would be awesome

 

[Cupra Kid]

Would it not be possible to run it hydraulically

 

[[email protected]]

Would it not be possible to run it hydraulically

if you can find and install a TDI bulkhead and pedal box assy then ye - TDI was the only mk2 hydraulic, not an easy bolt in sorry - looked at it a few times

checked my spare box but came without it sorry chris

 

[Chrisdaman]

if you can find and install a TDI bulkhead and pedal box assy then ye - TDI was the only mk2 hydraulic, not an easy bolt in sorry - looked at it a few times

checked my spare box but came without it sorry chris

it would be an epic pain to run a hydraulic clutch, cable is what i've got so i'll stay

any ideas where i might be able to get the part number flapper?

 

[Chrisdaman]

do these look like the parts?
02B 141 708A bearing bracket
02A 141 728 boot
02A 141 730 toothed lock washer
02A 141 740A push rod
357199356 - Cable Clutch Cable/Engine Mount Bracket

 

[[email protected]]

16v cable assy as it's longer

need to see the box but as you are after the conversion parts i would guess you'll need the mounting bracket too (9) added to the one thats there


8 9 18 17 16 15 14 10 11 12 13

pretty much all of it

 

[Dolly_Gti]

its the bracket the goes to the rear engine/gearbox mount, its got a cut out for the cable to hook into

 

[paultownsend]

tsr sell the full kit. around £120 iirc

 

[[email protected]]

tsr sell the full kit. around £120 iirc

they do have a habit of charging good money for cheap bits don't they

 

[raddo-dave]

i only gave about £70 from vw for the lot

 

[sionw]

need to locate these parts for my conversion anyone know where?

 

[Dolly_Gti]

nice to see thread search, i remember this thread first time round lol... but i cant help with you