Gorgeous car. Got a soft spot for R32's... Dont suppose youve got a link for your side lights aswell have you??
ta
ta
-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
The Ibiza's replacement....
- Thread starter Ibiza 130 tdi
- Start date
-
- Tags
- ibiza replacement
nice improvement with the sidelightsneed to do something with the rear wiper though, at least get an aero one!
There's a story about that.....
I did order one off ebay. Got it through the post and it was just the wiper rubber. They advertised a bit wrong in my opinion but stand their ground. Even though the picture showed a wiper blade AND arm. Just waiting for the next pay packet and will get one!
Running very close to the wire this month...No more candle power
Cheers dude! I do too that's why I bought one!
The sidelights on these are different to the sidelights on the SEATS. Unless yours is the same? Are yours the flat fitting or the bayonet fitting?
Deleted member 13581
Guest
Hopefully i get the chance to have a look around this in the car park at UD. The wheels going to be on?
Nice sidelights, makes such a difference.
Nice sidelights, makes such a difference.
I should be on the Vagowners club stand now!
But if I'm not it'll be in the car park. But 99.9% sure I'll be on an outside clubstand!The wheels ARE on now!
Deleted member 13581
Guest
Pics up! Pics up! Pics up!
Or are you waiting for the unveal on Sunday?
Stand will be good. Get it cleaned now.
Or are you waiting for the unveal on Sunday?
Stand will be good. Get it cleaned now.
Pics up! Pics up! Pics up!
Or are you waiting for the unveal on Sunday?
Stand will be good. Get it cleaned now.
They're uploading now
I'm working 8:30 - 5pm tomorrow so will have to wash the car when I get home!
Pics of refurbed wheels!
Sent these off to Lepsons (Swindon branch) for refurbing. They were badly curbed all the way round, and one wheel had a bad scuff over 2-4 spokes. They've been acid dipped, sand blasted, filled/repaired, and powder coated. I think they look spot on!
Even done a brilliant job of the inside dish too!
I've coated them in paint protection, and then put some of my HD wax (inside and out) of the wheel to try to keep them in as good condition and make it as easy to clean as possible.
Sent these off to Lepsons (Swindon branch) for refurbing. They were badly curbed all the way round, and one wheel had a bad scuff over 2-4 spokes. They've been acid dipped, sand blasted, filled/repaired, and powder coated. I think they look spot on!
Even done a brilliant job of the inside dish too!
I've coated them in paint protection, and then put some of my HD wax (inside and out) of the wheel to try to keep them in as good condition and make it as easy to clean as possible.
Deleted member 13581
Guest
Cheers dude! I do too that's why I bought one!
ahhh ok yep mines 501 flat, no worries.... once again gorgeous car
![[B)]](/forums/styles/seatcupra/oldforumsmileys/shades.gif "Cool [B)]")
ahhh ok yep mines 501 flat, no worries.... once again gorgeous car
Yer, these use the old school bayonet! The same sidelights they fitted to the Mk1 Golf I believe!
Awesome finish on the wheels mate, they look spot on
How come you'll be on the club stand on Sunday, someone drop out? I don't even know whos on the stand this year lol
They are great!
Yer someone dropped out so I'll be taking their place. The car is all tucked up in the garage now, all polished and good to show! Very nice car, and the wheels look lovely too!
Enjoy it!
Thank you! Appreciate it!
congrats on the new car.
shes an absolute minter so best of luck with it!!
Thank you - means a lot!
Bought a substantial mod for the R32! Should be getting it all done next weekend with any luck!
Bought a substantial mod for the R32! Should be getting it all done next weekend with any luck!
Exhaust?
Exhaust?
Ah you're no fun are you?
Yes - ordered a Milltek Non Res cat back. I will be going for the Sports Cats and the Milltek Manifolds aswell, but am starting from the back and working my way forward
Ah you're no fun are you?
Yes - ordered a Milltek Non Res cat back. I will be going for the Sports Cats and the Milltek Manifolds aswell, but am starting from the back and working my way forward
Well it was always on the cards with an R32 lump under the bonnet
should sound lush, I've heard all the youtube vids, but not a patch on a real life example
Back to front is the way erm... forward lol. No point getting manifolds and cats if its gonna get bunged up by a standard cat-back setup.
Well it was always on the cards with an R32 lump under the bonnet
should sound lush, I've heard all the youtube vids, but not a patch on a real life example
Back to front is the way erm... forward lol. No point getting manifolds and cats if its gonna get bunged up by a standard cat-back setup.
Haha! And if I'd done manifolds first, I'd have had to have fitted them - refitted the rest, them taken them off and refitted them again when I wanted to change. And - cat back will sound nicer first too
Similar threads
