Hi,
Maybe you have some water coming from ventilation grills? Do you have much water there in the boot corner?
The best way to see is to go to a car wash, sit in the boot and see where is the water coming from....... Did you make any check like this?
But it's so f...g cold out there.....-20C
I still have a little leak from somewhere on top, and i suspect hinge because I could not seal it completely.
I will renew my works on that issue in spring.....now i just don't care
hey , no its not the ventialtions grill, and its not much water , but not much is even to much . u dont see anything because u cannot see the place where its leaking too less space to look ... its behind c-pillar , but not from above!!! there were leaks from above but i finally fix them ... it was the hinge
now im guessing the water must come from wheel arch, dont want to remove the bumper ... did you ever removed your bumper ? dunno how i manage this ... its a shame that such a nice car is leaking that much ... im so dissapointed
My problem is solved,look in to the post # 98 at last 2 pictures,there was my problem, 1 cm of missing sealant.And no i didnt remove the bumper completely just i pull that corner from the suport.
First my problem was like in the post #95 but i put sealant inside the hinge like in first picture from post #98.
Where u find the water ,maybe u can put some pictures here,it will help us.
Check the ruber from the ventilation from this pictures and there is enough place to look in the place u say look t me.
hm , i am not allowed to post URLs to toher sites after i have made 15posts or more ?!?!
tomorrow i will try to remove bumper like you ... are there just 2 screws to drill out ? if its done i will put sealant where you did and hope its fine then
There are 4 screws inside the trunk and 5 other in each side on the weal,there are more under the bumper .
U can make 15 post easy.It is easy to understand from pictures.
There are 4 screws inside the trunk and 5 other in each side on the weal,there are more under the bumper .
U can make 15 post easy.It is easy to understand from pictures.
Yes u have to remove the coverpanel inside the boot and to remove the bumper even just a little u have to unscrew those 4 screws from inside the boot and those under the bumper.
my car is a phuckin joke .... i sealed complete hinge ( i removed hinge completely to be able to seal it at the top & buttom) ... everything ... and it still comes from above like in post #95
if i hammer down normal whater its dry ... so is carwash ... its dry ... if it rains a day .. its wet ... WTF ? ? ? its a mysterium ....
yellow line is where i sealed .... and i sealed with quality product , autobody sealing no silicon or something
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.