so did some more stuff over the weekend
so i tidyed the fuel rail up and all the wires to it
this is how it was
then to this
so i striped all the wires back and re-taped them up and hid all the wires to the injecters.
then looking at the manni and how scratched it was deiced to re-paint it again.
dint take it off this time just masked the bay up.
this is how it was.
so i rubbed the mannin down and masked up
heres what i used 3 coats of gloss black and 3 coats of clear laqure.
then moved the brake booster from under the manni
old pipe
new pipe
it sits nice down the side off the charge pipe and you carnt see it.
what i used for brake booster move.
1. 10mm silicone pipe
2.3 jublie clips and a few tie wraps.
been to custom pipes today a bit dissapointed the bits that i was going to have done turned up wrong bends
so while i was there i had the resonator taken out
before
and ryan the owner not setting is trousers on fire this week lol
to this
nice freebe for me
and the shop
get ya head down while you wait
and some of the exhaust tips hes made
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.