Carmats.co.uk

what have you done to your car today ?

No the side of ur bumper that connects to your wing, you have missed sliding a catch in, if you look at your pic u will see
 
Ahh I know what you mean. I tried to line that up for about an hour and it wouldn't, I think the crash damaged the wing slightly :(


Sent from my iPhone using Tapatalk
 
Snapped my dipstick guide during thermostat change... Great, specially when euro order me one.. Bus down to collect and..... The paperwork been delivered but not the part. Cheers.
Gsf have one in stock il get that first thing tomorrow

Noticed I need lower crankcase breathers too. Order a load of 19mm pipe then
 
Mines is the same mate, I finally got mine lined up, I took it right of the took my caulk gun and pump some heavy glue behind it then stuck it on, held it for 5 min now it's kinds perfect haha
 
mill5y said:
Snapped my dipstick guide during thermostat change... Great, specially when euro order me one.. Bus down to collect and..... The paperwork been delivered but not the part. Cheers.
Gsf have one in stock il get that first thing tomorrow

Noticed I need lower crankcase breathers too. Order a load of 19mm pipe then
Click to expand...

Nothing worse
 
Just put on a Cupra R gator on my car
4bca741c600263c82151297f399dcd37.jpg


AmD Stage 1 Map, Forge 007 DV, CDA Induction Kit, GT80 Milltek Sports Cat Back, 40mm Springs All Round
 
Ordered all the vacuum hosing for the expansion/screen wash/intake manifiold area today, already have a few hundred quids worth of silicone hosing ready to go on at the end of the month, spent my afternoon after work sanding, priming and painting the expansion and screenwash caps black, looks so much better. The cars black, and all my aftermarket hosing is in red, it'll start looking class in a couple weeks time once its all on. Can't wait :)
 
Bought my new LCR a week ago for a very good price due to the fact it was in need of a bit of mechanical love. Bodywork wise she is spot on. Today she has gone in for a new timing belt, water pump (metal impellor), aux belt, rear brake caliper, gearbox shim mod and a service. She's been sat on drive for a week now not moving as the cambelt was well overdue (4 years!!!!!), so was too scared to driver her. Can't wait to get her back! 3rd LCR now, can't get enough of them!

Sent from my SM-N910F using Tapatalk
 
bruceR said:
Stopped in a lay by to reattach my boost hose [:@]
Click to expand...

Know the feeling well bud! Had to replace lower boost hose due to metal wear a couple months back. :blink:

Nice Car btw BruceR. Been creeping about on your thread for a while.
__

Today I put some FR mats in, Replaced ashtray, collected refurbished alloys with 4 new Goodyear eagle f1's :funk:
 
I replaced the locking mechanism in one of the back doors and ordered 2 other locks.

I've also started repairing the window switches
 
Fitted my mates new cam position sensor and new crankshaft sensor
b638f7443031a3d97b8c604809fe0caf.jpg
131458f66359c8476272a6ca6eab3e99.jpg
a02dedc18277e7b82bc919ccee17c95a.jpg
b489f4d1222ab9af2663248a7272f2fb.jpg
 
Last edited:
Just ordered alloy coupler & silicone 90deg hose for my lower intercooler connection, original hose "lugs" have finally given up the ghost [:@]:cry:
Gonna have to attach original hose with metal tie-wraps for now :(
 
You must log in or register to reply here.

Similar threads

Car cranks but no start
Replies
30
Views
3K
mty12345
Weird issue when turning on car ignition
Replies
3
Views
988
sol_j
Smoke from Alternator area
Replies
2
Views
854
Nam-uk
Nam-uk
Water Lying on Door
Replies
6
Views
1K
mty12345
Brake fluid leak
Replies
15
Views
707
Connor H
Connor H
Top Bottom
Back