what have you done to your car today ?

[bruceR]

The hose was from AutoSiliconeHoses: 70mm X 90deg bend
The coupling was from Creation Motorsport: 68-63mm

It's peein' down here so no pictures 2day

 

[Gokiwi64]

Had all the doors except the drivers door lock shut - cannot open them

 

[kiemcd]

Took the car to a dyno day at EFI parts in Runcorn, mk1 Leon Cupra and ran 180.9hp

Would post pics but not allowed yet


Sent from my iPhone using Tapatalk

 

[bruceR]

Got a good deal on Groupon for a VAX carpet cleaner with attachments so decided to give it a go on the car seats. Hoovered the inside first then set about it with the VAX:

OMG didn't think they were that dirty!!!!!!

 

[Bigjohn84]

Got a good deal on Groupon for a VAX carpet cleaner with attachments so decided to give it a go on the car seats. Hoovered the inside first then set about it with the VAX:

OMG didn't think they were that dirty!!!!!!

How much mate I'm looking at them now but only one has the attachments but that's £150

 

[bruceR]

Hey John, got it half price through Groupon - Vax W86-DP-T - cracking piece of kit for £74

 

[DrewCole]

Changed the rear wiper for a MK4 Golf one.

From this:

To this:

 

[bruceR]

A lot better than the OEM SEAT one, is that not the mk5 golf one tho

 

[Bigjohn84]

Looks good but rather the rear fabia

 

[DrewCole]

Gave my tried wheels a freshen up.

 

[bruceR]

Nice job there Drew, always a good feeling when you can stand back & enjoy your hard work and effort

Just finished washing exterior & and full clean of interior on both mine and the Mrs cars

 

[DrewCole]

Thanks!

They ideally need a full strip and power but this will do for now.

I'll give it a few days for the paint to harden then it'll be a clean and wax for mine.

 

[Bigjohn84]

Got new parts to put on my car, gonna fit them after my tea

AmD Stage 1 Map, Forge 007 DV, CDA Induction Kit, GT80 Milltek Sports Cat Back, 40mm Springs All Round

 

[bruceR]

Annual service carried out by the good lads at Star Performance, they also removed/cleaned/refitted the sump as it was weeping

 

[Bigjohn84]

Fitted new induction kit and new red coolent hose still to put on the sfs tip and new red hoses on the N75

AmD Stage 1 Map, Forge 007 DV, RamAir Induction Kit, Oversized SFS Tip GT80 Milltek Sports Cat Back, 40mm Springs All Round

 

[bruceR]

Managed a nice mpg on drive back from service:

 

[Alexis27]

Gave my tried wheels a freshen up.

Wow nice job. What paints did you use?

 

[DrewCole]

Wow nice job. What paints did you use?

I used Hycote paint.

After a really good degrease and clean I rubbed down any problem areas as best as it would, then:

2 coats of white primer inside rim and face.
2 coats of silver on the inside rim and 3 on the face.
3 coats on clear on the face

Came out okay, a little darker than stock but looks nice.

 

[MOZ_LC_TDI]

Replaced passenger side window winder lifters and cabling mechanism (After the original cheap plastic lifter snapped and caused my cable to get chewed up ) . Used the £10 eBay repair kit and fixed myself rather than the £50+ assembly with brackets.
Straight forward job but fiddly especially stretching the final bit of cable over the last pulley wheel but done and working ( yes I replaced the seal with butyl too )


Sent from my iPhone using Tapatalk

 

[Bigjohn84]

Got my oversized sfs tip fitted what a joke. Went for a drive but didnt push it just incase lol. Still got two red sfs hoses to fit on my N75 valve. Looking good so far.

AmD Stage 1 Map, Forge 007 DV, RamAir Induction Kit, Oversized SFS Tip GT80 Milltek Sports Cat Back, 40mm Springs All Round