what next for my mk2 ibiza cupra replica?

[abhardwaj1990]

tornado red is the best when shiney

 

[vngtx]

everytime i wash it i notice the passenger door is more pink than red. the spoiler is a mess, it was lime green when i got it.

 

[gtikezz]

lol i know its not hard but just alot of hassle, especially when u spill some back to black on your paint work
lol

yup or it goes on the glass its a b***h to clean off again

 

[gtikezz]

tornado red is the best when shiney

oh yes ime not sure of the exact name for the color of mine

 

[vngtx]

lowest one ive seen was 110mm and it was stuck on the floor!

oh yes ime not sure of the exact name for the color of mine

i think yours is flame red

 

[gtikezz]

i think yours is flame red

thank you nice to know ( :

 

[vngtx]

either flame red or mars red. it says in the spare wheel space in the boot. its written in spanish like

 

[vngtx]

anybody with 17'' alloys had them scraping against the rear wheel arches?

 

[abhardwaj1990]

I have scraping on the rear, only when I've got my spacers on and I've got a load in the back

 

[Dave_R]

anybody with 17'' alloys had them scraping against the rear wheel arches?

Shouldn't rub on the rears unless you have the wrong offset wheels or wheel spacers. And if you have got the right offset (ET35 to 37) and no rear spacers then the only thing it should rub on is the arch lining.

 

[GtiBoy]

but the big question is......how low do you go?

Start from the bottom and work back up

Mines about 100mm on the fron 110mm on the back no issues what so ever well if i throw it into a corner at 70 then i rub a little but its not very offten u get chance to do that nowadays i have 100's of spped humps by mine and have no issues with them just go over them about 5mph. The thing with the gti is the spliter sticks up a little so u dont catch it to often. i carnt go up kers tho

 

[vngtx]

i measured mine today and i can drop 50mm on 17s but will have to roll the wheel arches.

 

[CraigW]

The front does sit abit higher as standard compared to the back. I have lowered the front alittle more than the back.

I dont know exact figures as Im on coilovers now as I had to raise the car and I didnt measure before I changed to them.

You could go with bigger brakes at the front and a rear disc swap. Thats my next step I think along with ARB's.

 

[welly]

What exhaust did you go for in the end? I'm struggling to find a suitable one.

 

[vngtx]

The front does sit abit higher as standard compared to the back. I have lowered the front alittle more than the back.

I dont know exact figures as Im on coilovers now as I had to raise the car and I didnt measure before I changed to them.

You could go with bigger brakes at the front and a rear disc swap. Thats my next step I think along with ARB's.

i have 256mm vented discs at min, do i only need the carrier to get it to 280mm?

 

[ibizaboi]

im on 17" and low duno how low though the only scrubbin i ever got was when the front was wound down 2 the botton lol

 

[EnGbudd]

"how low do you go?"

Really lowwwwwwww!

 

[griff82]

40/60 mate is the way to go