RikH

Texas Cowboy
Oct 17, 2005
2,473
0
Yorkshire
Had a quick search but couldnt find what i was after, but i do remember it coming up before

Had a blueflame exhuast on with a race cat for about 1.5 month now. Scanned the car for fault codes about 2 weeks ago and it had bank 1 below efficiency threshold, obviously becuase of the cat. But no EM light up

Pulled over last night, got in 5 mins later and its firmly on. Car got home ok, drives as normal from what i can tell and im away over to leeds to get it on vag-com now.

My question is, the only way round this is to have it mapped out am i right? If so i was going with a Jabba map, can they do this while they have the car and the EM light will never come on for this reason again?

Cheers
 
I don't think that jabba can map it out

CC & Revo can (for stage 2 maps)

there is some resistance blocks / spacers I think.... not sure on any conclusive results (or info though)
 
VAG-COM brought up two codes
the low efficiency that we knew of and a new one
clutch switch implausible signal

reset the car and the 20 mile drive back hasnt brought the light on again
hmmmm
 
RIK

Control Module Part Number: 06A 906 032 MJ
Component and/or Version: 1.8L R4/5VT 0003
Software Coding: 11510
Work Shop Code: WSC 06402
Additional Info: VSSZZZ1MZ3R078769 SEZ7Z0B1840553
2 Faults Found:
16804 - Catalyst System: Bank 1: Efficiency Below Threshold
P0420 - 35-10 - - - Intermittent
17947 - Clutch Pedal Switch (F36): Implausible Signal
P1539 - 35-00 - -
 
Last edited:
what do you mean by CEL robbie?
its ok ive been reading for the last hour, i get it now

ive emailed the fella that makes the part in the pic ive posted below, guess thats what you've got mate
 
Last edited:
RIK

Control Module Part Number: 06A 906 032 MJ
Component and/or Version: 1.8L R4/5VT 0003
Software Coding: 11510
Work Shop Code: WSC 06402
Additional Info: VSSZZZ1MZ3R078769 SEZ7Z0B1840553
2 Faults Found:
16804 - Catalyst System: Bank 1: Efficiency Below Threshold
P0420 - 35-10 - - - Intermittent
17947 - Clutch Pedal Switch (F36): Implausible Signal
P1539 - 35-00 - -

anyone please help with code 2 (clutch)
got no idea what to do with the ******* car now!
 
yep im looking on a place that j@mes ordered his from, rockauto, but their site is near on impossible to find what im after. if you have any joy mate let me know

there is guy in america that makes these, but they look different, going to email him just now

secondary_O2_sensor_angle_block_004.sized.jpg
 
Last edited:
i believe its very common for the BF TB systems, you never had it?
i know how to sort it now though, the clutch one thats annoying me
 
i believe its very common for the BF TB systems, you never had it?
i know how to sort it now though, the clutch one thats annoying me


Had a code: 'lamba sensor behind catalytic convertor reached limit'

car failed an emissions test since ..
 
didnt i paypal you the money today?
my paypal says i did...Payment To PHILIP BURKE 31 Aug. 2007 Completed
 
Last edited: