Where are your boost Gauges?

[Chrisdaman]

alright lads and ladies

i've bought a 52mm Mocal boost guage for my ibiza, and cant decide where to put it.

could anybody put up a picture of where theirs is please so it can help me decide?

any help is mucho appreciated

Cheers
Chris

 

[Olly20VT]

I dont have a pic but mine is in a nomad A pillar pod, lots of peopl on here have the same thing, it looks factor, very nice IMO.
SEE HERE

 

[sandro123]

ive got one, just not fitted yet though. will be soon

 

[Ninja]

yep same one on mine.. looks quality

 

[Martin M]

If you're running a Mk2 dash, i don't think the nomad one will work as the dashes are different shapes.
You could just get an a-pillar mount like this though, but obviously single:

http://cgi.ebay.co.uk/Seat-Ibiza-Mk...ageNameZWD1VQQcmdZViewItem?_trksid=p1638.m118

I had one in mine with an oil temp and volt gauges and it looked alright.

 

[Chrisdaman]

coudl you see the gauge clearly? thats all i was worried about with one of the A-Pillar ones, was that visibility of the gauge wouldnt be great

 

[Martin M]

coudl you see the gauge clearly? thats all i was worried about with one of the A-Pillar ones, was that visibility of the gauge wouldnt be great

Yeah mine is fine there. Good thing is you can see it at a glance without taking your eyes off of the road fo too long.

 

[sandro123]

If you're any good or know anyone thats good with fibre glass you could put a guage or two in the centre console.

 

[Chrisdaman]

thanks for the help people. i've ordered myself an A-Pillar Gauge holder, looks tidier than what i had planned

 

[Beaker™]

 

[Chrisdaman]

yeh that does look good

 

[cupraolli]

mine are down here standard place on the cupra r

 

[Beaker™]

I drive very much on my boost gauge, found it hard to keep an eye on while it was down there tbh.

 

[JIMYU]

your can't beat the classic nomad pillar imo

 

[TurboCupra]

Who is this made by? Looks just right...

 

[Beaker™]

RGM i think mate, give me 2mins.

EDIT/ Its an RGM gauge pod, part number: MRB165

Some more pics of mine in this thread by the way http://www.seatcupra.net/forums/showthread.php?t=82054&highlight=RGM

 

[CupraElliott]

Always wondered how you connect these up? Is there a guide somewhere? I know you bring a t piece off some boost pipe? But which one, the one that comes off the top of the dump valve?

 

[__B3NNY__]

you can T it from there, Also im sure you can T it from the line that come from the FPR. I have mine Teed into the brake servo line where the green nipple is.

 

[SEATCOOBER]

i redid all my vac hosing and tyded it all up will get a pic up tomorrow and moved the boost gauge connection from brake servo pipe to a t piece in the dv line the car feels so much smoother and nicer and the dump is well nice and crisp wish i had done this first off!

 

[CupraElliott]

Know where al be putting mine then. Cheers guys