Blow Off Valve

[JamJay]

O Yeah In That Way Crap, Stil Trying To Figure Something Out,

P.S. I have Nothing To Do At Work So SeatCupra.Net All The Way!!

I'll be watching this thread closely then and see which one your opt for. I have heard an OEM Bosch one with an open cone air filter and it sounded quite nice and that was without a remap. Hopefully it'll get louder once I get my map on, then if it breaks or affects performance too much, i'll have to upgrade but i'm not after making it Scoobyfied if you get me, it's just nice to know that the turbo is there

 

[JasKandola1]

I'll be watching this thread closely then and see which one your opt for. I have heard an OEM Bosch one with an open cone air filter and it sounded quite nice and that was without a remap. Hopefully it'll get louder once I get my map on, then if it breaks or affects performance too much, i'll have to upgrade but i'm not after making it Scoobyfied if you get me, it's just nice to know that the turbo is there

Yeah tru, U Know The OEM Bosch One, Is It That Little Plastic one? Are They Any Good?

 

[JamJay]

Yeah tru, U Know The OEM Bosch One, Is It That Little Plastic one? Are They Any Good?

Yeah, it's the standard plastic one. I have no idea if they will be any good after a remap though, that's what I need to find out. I am not sure they'll hold the extra boost that well, hopefully someone can advise.

 

[JasKandola1]

Yeah, it's the standard plastic one. I have no idea if they will be any good after a remap though, that's what I need to find out. I am not sure they'll hold the extra boost that well, hopefully someone can advise.

Im Sure There Was A Thread On Here About It, And They Are No Good, More Than Likely You Will Need A Stronger 1!!

 

[MrJohnnyB]

I got a bosch unit not remapped thus not pushing out much boost and it sounds pretty beefy since i put the induction kit on.

 

[MarkE]

Just noticed the tags.

 

[dan boy]

Im Sure There Was A Thread On Here About It, And They Are No Good, More Than Likely You Will Need A Stronger 1!!

i had to get a stronger one when i had my re mapped went for forge 007 lot better

 

[tarzan]

bosh ones i prone to fail.change to forge tip,forge007 a remap and big airfilter and turn the dv the opesite way and you got loud noise!i got this on mine picture one page 4

 

[dan boy]

done same with mine and sounds alot better got a cda carbon air box and sounds alot louder with that on

 

[caveo]

Cone filter ( jetex or K&N ) and a forge 007p = loads of sound and NO loss in performance.... nuff said

 

[cupra.rich]

hi ive just joined on hear and im looking to get a dump valve as ive just sold my subaru which had a forge one and i dont like not having one, but the thing is i have no idea where the oem dump valve is as ive never had one of these so pics or a guide would be great!
(sorry if this has been done already)
cheers
rich

 

[caveo]

The DV is the one on the pipe which comes out the back of the air box and down the back of the engine.
The forge 007p DV is the best one , but if your after the tsssss noise your scooby made your about to be VERY disapointed as any vent to atmos valve ( like a scooby one ) wont work for long.

 

[cupra.rich]

The DV is the one on the pipe which comes out the back of the air box and down the back of the engine.
The forge 007p DV is the best one , but if your after the tsssss noise your scooby made your about to be VERY disapointed as any vent to atmos valve ( like a scooby one ) wont work for long.

what about the splitter-r forge dv mentioned earlier??
why cant they make the same noise as the subaru??
cheers

 

[LEE69]

 

[caveo]

Read this , and the forge split r isnt very loud and affects performance slightly. Just get an open cone filter and a forge 007p for some noise and perfomance.

 

[caveo]

I think that guys gone on the auto trader to swop back to his scooby .... or a bus so it goes tsssssss lol

 

[cupra.rich]

lol na i havent, although i wouldnt mind having a bus! lol shame as i like the wphoooooooooooooosh noise but il have to get over it!

 

[dan boy]

http://s725.photobucket.com/albums/ww253/danspics2007/?action=view&current=seat015-1.jpg its under black cover mate

 

[JamJay]

Cone filter ( jetex or K&N ) and a forge 007p = loads of sound and NO loss in performance.... nuff said

Thank you for the info. This is the route I am most likely taking

 

[Lodgey180]

^what he said^