First i cleaned where i was gonna fit them too, put them on dry to see where i need to screw the back caps to. Screwed the back caps in place, then put some tigerseal on the clips and stuck it in place. Screwed the front to the inner arch.
I then just put tigerseal on the top of the sideskirt and put the bricks in place to hold it
time taken: about an hour each side.
I then just put tigerseal on the top of the sideskirt and put the bricks in place to hold it
time taken: about an hour each side.
Just wanted to ask if you passed MOT with air intake in that position?
Had mine similar to that and failed because it wasn't secure enough!
Nice car by the way!
Cheers although the surrounds i ordered with them dont fit, the front one i just mounted the plate on its own and the rear one i managed to force the surround up under the seat badge lol.
WHL_Spurs
Guest
reminds me when i colour coded the old xr2 - just wonder how it would look with the skirts/splitters/pillars and mirrors gloss blacked too, normally i'd pass but on a clean black one like that i reckon would work
mmmm job to say
btw the grille shells cost so little be cheaper to replace it mind you need paint done then but good excuse to have all the bits done at once then
mmmm job to say
btw the grille shells cost so little be cheaper to replace it mind you need paint done then but good excuse to have all the bits done at once then
reminds me when i colour coded the old xr2 - just wonder how it would look with the skirts/splitters/pillars and mirrors gloss blacked too, normally i'd pass but on a clean black one like that i reckon would work
mmmm job to say
btw the grille shells cost so little be cheaper to replace it mind you need paint done then but good excuse to have all the bits done at once then
Yeah i am going to buy the one off of dinky dave once i have the cash.
Have a week off next week list of things to do:
Secure rear number plate surround securely
Get rid of condensation in side repeaters
Clean engine bay
Polish up rocker cover
New cold air feed (my one has brokerredd)
Camber/tracking done to stop me from wearing the tyres anymore
a good clean inside and out
a nice wax
new clutch cable
clean throttle body
Gonna be a good week, just hope the weather holds up.
I have a similar list when it comes to the cleaning bit etc. Plus Im going to paint my rocker cover.
You said about the cold air feed, I was thinking of attaching a bit of alloy/silcone hose to the airbox then a cold air feed to that pipe. A few measurements etc to take first.
Sounds like a good idea. post pics when you do it
I will do. I, pretty certain that it should work.
mk216v
Guest
Why are they so darn expensive?! Quoted roughly £630.00 for a set of Borbets with tyres. They are frikken hot though. Can't even find a set on e-bay. those are the 7.5 x 16 rims right?
Similar threads
