samslow
Guest
how hard is it? ive done it b4 on older cars and was hoping this would be nice and easy as its only 3 years old
anything i need to know
thanks
1.9 tdi sport 55 plate
anything i need to know
thanks
1.9 tdi sport 55 plate
if your stuck 10 socket, a 10mm allan key approx 3/4" long and a grinder you can make your ownright
read the guide and now on the hunt for a hub spreader tool!
what other bits is it worth replacing while i m taking the strut off?
Is there any bits there that will probably break anyway?
Did i read that the locking nut on the hub will need replacing too?
thanks
if your stuck 10 socket, a 10mm allan key approx 3/4" long and a grinder you can make your own
right
read the guide and now on the hunt for a hub spreader tool!
what other bits is it worth replacing while i m taking the strut off?
Is there any bits there that will probably break anyway?
Did i read that the locking nut on the hub will need replacing too?
thanks
Laser Tools (tool connection) sell a copy of the VAG tool - Halfords will order it in for you as Laser Tools will not supply direct.
I tried using some large screw driver bits - but they all just sheared off - too hard and the profile was too agressive at the transition from wide to narrow. The Laser Tools tool works a treat
well for everyone else -- 1/2" drive 10 mm socket 10mm allan key ground ( and DON'T BURN IT)to 5.5 thick approx 9 wide x17.5-18 long with the corners lightly radiused, as it was a cheap socket I araldited it in if you have the stuff in stock it's quicker than standing in a q' @hellfraudsRight ho, after you sunshine
just found one on ebay sorted!
but do i need to replace top mounts as ive heard they may break?