Good work :clap:
Now just have to wait for my serial cable to arrive!
Was almost on the point of spending £30 or so on a AutoWindow module, hopefully I won't need to bother now!
 
dumb question:
is the cable people using the same as that for vag-com?
they are purchasing or own the serial cable?
if so, a double use for same kit - me likes

The same, but has to be a good quality cable...

Cables from THIS eBay seller (marvin123) are confirmed to work with both VAG-Com and VDS Pro.
( Titled : " OBD 2 KKL Diagnose - Kabel für VW / Audi / VAG " )


.
 
Last edited:
How about just controlling the front windows instead of all four. Can this be done?

Yes !
Someone confirmed this, I remember reading somewhere else.

But I do not know which address corresponds to which windows ...
Just try one by one... Should be easy

For me it became obvious that : one address = front, another = rear
and one for the sunroof (whether you have it or not...)
 
Last edited:
i'v always been able to open an close my windows with the fob, says it in the book
 
This looks good guys, I'll try and get hold of a laptop with a serial port and give it a go this weekend! :)
 
i'v always been able to open an close my windows with the fob, says it in the book

Then yours was programmed. It really doesn't do it by standard.
And no, it's NOT in the owner's manual.

Or :
You probably mean that you can do it, by holding the the key turned in the doorlock ?
That's true. And indeed documented in the manual.

But not with the remote control buttons ...
( that's what we mean with 'fob' )
 
Last edited:
Which sets me thinking ...

This really is a "Must Do! Mod" when you have your car delocked :) Like me.

I was really missing the comfort functionality of my doorlock last summer.
 
na hold the button an the windows come down while i hlod it. press lock and they fully close. read it somewhere hence knowing bout it, sure it was the manual??
 
Right, I want this too but only have a laptop with a USB and no serial.

Anyone round the leeds area want to do this to mine for some beer tokens? :) ;)
 
Done this today, works spot on :)

Just a shame there is no info available to enable the 'one touch' up/down windows.....

Someone must know (apart from the guy who made the KVW100)
 
Never managed to get VDS working with my serial lead :(

I had to change the port in VDS options to com4 even though my laptop only has 1 port lol.

I used the boot disc thats on this thread that was fixed to have a baud rate of 9960.

There is a guy on TDIclub who is going to try crack it........not sure if he is all talk.....but i'll keep checking his progress.