what have you done to your car today ?

[Mk1 banana]

Fitted my new gear linkage, going to cut the existing lug off(the old one), and drill a hole, then but and bolt to reduce my side to side movement then refit, but thanks to a friends flooded rx7 taking up my lunch break I didn't mine finish today.


Made in Spain, made better in England 223.3hp 263.8lbft

 

[M20FES]

stuck £70 of shell v-power diesel in it

 

[joshy514]

Nothing, changed front and back discs and pads on a mates 140 A3!

 

[Kingscote]

Replaced the offside front cv boot. Then went up to Birmingham to look at and buy a vw corrado for my bro in law

 

[Gaz861]

Finished off my catch tank & fitted tip

 

[Yatesy87]

Installed fan jets for the windscreen, all they need is a light sanding/filing to make them narrower and the clip straight in.
They are of a Peugeot and the ebay ad was FRONT WINDSCREEN MIST TYPE SPRAYER WASHER JETS X 2 FOR PEUGEOT 206 6438E6 6438E6 is the part number for them, 10 minute job.
Click picture for video

I trimmed and fitted Honda civic aerial an also tried to fit a set of the above washer jets but the hose connections are the wrong way round! Am I being thick or have I ordered the wrong ones?!

 

[LEE69]

If you ordered off my link no they are the right ones, the hoses push on the same way as the originals

 

[Yatesy87]

Yeah I ordered the same ones but the connections are opposite to mine :/

 

[LEE69]

It's ok i just checked mine are the same they do fit just wiggle the hose over the nipple on the jet, if you need more slack slide the solid tube through the zipties/holders mine were dead simple to do.

 

[Harfi]

Found another problem today the auxiliary water pump seems to have packed in lol

 

[Yatesy87]

Ahh ok, I'll have another go at them when I get 5 mins. Cheers

 

[mill5y]

Got my new wheels, i thought they were 16s, the guy On phonevyesterday thoight 17s, turns out their 18s!
Cupra r????
Dropped my height a bit too, still needs more tho

 

[big eck]

Got my 3" cobra catback fitted today.

 

[DuamoLCR]

Took delivery of a set of Avon zz3 £60 a corner .. Bargain


Sent from my iPhone using Tapatalk

 

[kr1s77]

i cleaned my sticky turbo with mr muscle & a tube. WOW what a diiference!! also checked the voltage of the battery 20v when running 18v when off. is this correct?? i thought it should be 12v and 14v

 

[RaviR50]

Lovely and sunny today so I washed and waxed again but also got the mirrors done in gloss white and replaced the carbon rear badge in gloss white with a carbon surround. try and get better pictures tomorrow

 

[LeonUser]

I got a new HU today! Went from standard pioneer headunit to this...

Very happy with it! Just need to buy the bluetooth addon for my phone to connect to.

Sent from my iPad using Tapatalk HD

 

[csd_19]

Got my new wheels, i thought they were 16s, the guy On phonevyesterday thoight 17s, turns out their 18s!
Cupra r????
Dropped my height a bit too, still needs more tho

Need some proper centre caps for those wheels too, get those VW ones to f*ck

 

[Mk1 banana]

i cleaned my sticky turbo with mr muscle & a tube. WOW what a diiference!! also checked the voltage of the battery 20v when running 18v when off. is this correct?? i thought it should be 12v and 14v

I'd' be checking the volt meter first mate, that is not normal... :s
12-13 not running(12 +maybe (1v) surface charge)

13.8-14.4v when running.


Made in Spain, made better in England 223.3hp 263.8lbft

 

[Andrew J]

new laser iridium spark plugs, master clutch cylinder and brake fluid working again