Aimez's mk4 Tdi FR Ibiza

Alex 17

No Smoke No Poke
Aug 17, 2008
1,920
0
Bedale - North yorkshire
Alex-Oh no I worded it wrong they are all the way down on the back but doesn't need to go lower am happy with it, the front needs to go a bit lower I am just too lazy I hate taking wheels off I normally end up slipping and the wrench knocking the wheels a little. Is' your a diesel Alex? I am worried about the sump and I have to drive over a cattle grid every time I leave my house so cannot go too low anyway, I want to be able to drive at speed I want without worrying about it or it is silly IMO.


Yeah mine are woud right down front and back , Both sit very very low . Yeah im scared of chipping my wheels with the wrench but i need to paint my calipers white.

Yeah mines a 130 tdi with a custom code remap and a bunch of other bits , Have a look at my rr in my sig :) , I've not really worried about it yet but then again ive still not gone over a speed bump in mine haha . I think it should be ok there is a un needed plate under the car protecting it anyway ! I can drive at speed but just worry about the little scrapes over bumps on the left side . Sure it will be fine.. I hope haha

Front
aa35050_447658132888_655972888_5953.jpg

Rear
34862_447658627888_655972888_595-1.jpg
 
Last edited:

jnc90

Active Member
Sep 24, 2009
100
0
Car is looking good! :) Quick question tho, how did you remove your mirror caps to respray them! Can't figure out how to get them off without snapping them! :(
 

Aimez

Active Member
Push ur mirrors in so they are against the window type position , then get ur finger in the back small end of the mirror where its folded and pull! Simples

I didn't take mine off and spray them they are cupra gloss black ones but the above is how you take them off but still easy to break the clip, I broke one and I know a few other people have, they still go back on but with one clip broken.
 

vroomtshh

Full Member
Sep 11, 2005
4,222
3
Dreghorn, Scotland
Wouldn't have a clue they drive it in made great figures so I am happy!

It should say somewhere. It 'shouldn't' matter but the figures can be distorted by running it in a different gear. A good operator can compensate but it would be strange to do so.

Your figures sound around what they should be though
Max torque might be a little late and max hp a little early but that's up to the map I guess and I doubt your chasing every little last hp

No chance of going to stage 2 anymore?
 

Aimez

Active Member
Yeh says 5th is it not meant to be then?! They did run it twice as the settings were wrong first time and it came out at 190bhp lol!!

Unless someone gives me some money unlikely! lol sometime next year moving out and I do not earn much so have no idea what money for savings I will have after wards.
 
Chris Knott Insurance - Competitive quotes for forum members