Air Filer extension

[psycho6285]

Hi

I am after the size for the silicone pipe I will need to move the Air Cone further towards the wing. At the moment is attached straight to the MAF. I know its 80mm maf as it is a LCR.

I have searched for it but no straight answer (i may just be being stupid tho!! lol)

Any help would be appreciated..
Cheers

 

[leonrob]

cant you get a tape mesure out and have a look ?

 

[psycho6285]

Very true, but at work at the moment and wont be able to get to the car till weekend, hoping to get brother to pick up the bits before the weekend,

 

[sheffboy]

I think people are using 100mm with the jetex cones

 

[psycho6285]

so its 100x80mm with no reduction? cheers.

 

[sambryant]

so its 100x80mm with no reduction? cheers.

yes this is correct how ever you will need a alloy joiner to. so that you can attach the filter to the new extension piece. this is because the outter diameter of the silicone piece will be geting on for 95mm or close to that. your filter will only fit 80mm

 

[sheffboy]

so its 100x80mm with no reduction? cheers.

If the outlet on the filter is 80mm then you'll just need a straight 80mm connector to the extension piece then an 80mm connector to the maf.

It all depends on the K&N filter outlet size I suppose.