-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
*BREAKING* James Judd's Forged 1.9 Mk3 Ibiza HTA GT2868R Build *BREAKING*
- Thread starter James.Judd.1
- Start date
- Status
Right decided on a HTA GT2868 with 0.86 a/r. Over the next few weeks/months I will be purchasing the turbo, an INA t25 topmount manifold, all the oil lines and gaskets ect, a walbro 255 inline pump.
I will then be getting 630cc injectors, electronic boost controller (undecided but likely to be AEM tru-boost) All additional pipework needed, 3bar map sensor ect. I will be making a weld-in boss for the MAF as I think it will look much neater than using an S4 housing.
And I am planning on using a copy of IbizaAlex's Revo Stage3/4 file he ran on his Ibiza.
Also looking into a LSD and an assortment of polybushes.
Then hopefully I will be a full member of the "Big turbo" club![[B)]](/forums/styles/seatcupra/oldforumsmileys/shades.gif "Cool [B)]")
I will then be getting 630cc injectors, electronic boost controller (undecided but likely to be AEM tru-boost) All additional pipework needed, 3bar map sensor ect. I will be making a weld-in boss for the MAF as I think it will look much neater than using an S4 housing.
And I am planning on using a copy of IbizaAlex's Revo Stage3/4 file he ran on his Ibiza.
Also looking into a LSD and an assortment of polybushes.
Then hopefully I will be a full member of the "Big turbo" club
That sounds very tasty mate, guess the K04 hybrid wasent enough? did u even drive it?
Taking my bumper off this weekend to look into fitting cooler
That bar u made that the cooler attaches to in front of your rad, how long is it?
Taking my bumper off this weekend to look into fitting cooler
That bar u made that the cooler attaches to in front of your rad, how long is it?
Should be good. I have been thinking about big turbo for the last few months and I thaught its now or never before I pay out for custom maps and manifolds ect.
Also my engine is way over-specced for a k04 hybrid and I may aswell make use of it
And ill get you the dimms tonight for the bar if I remember
Last edited:
Should be good. I have been thinking about big turbo for the last few months and I thaught its now or never before I pay out for custom maps and manifolds ect.
Also my engine is way over-specced for a k04 hybrid and I may aswell make use of it
And ill get you the dimms tonight for the bar if I remember
Yeh i see what your saying mate.
If u can remember that bar that would be great as thats my only problem now to be fair & after seeing yours i dont want to mount it any other way, best and most secure of seen.
So your car will be off the road for abit longer i take it......maybe i could buy your bar
Right decided on a HTA GT2868 with 0.86 a/r. Over the next few weeks/months I will be purchasing the turbo, an INA t25 topmount manifold, all the oil lines and gaskets ect, a walbro 255 inline pump.
I will then be getting 630cc injectors, electronic boost controller (undecided but likely to be AEM tru-boost) All additional pipework needed, 3bar map sensor ect. I will be making a weld-in boss for the MAF as I think it will look much neater than using an S4 housing.
And I am planning on using a copy of IbizaAlex's Revo Stage3/4 file he ran on his Ibiza.
Also looking into a LSD and an assortment of polybushes.
Then hopefully I will be a full member of the "Big turbo" club
Just remember to get the diameter the same as the S4 MAF tube as the element will be calibrated for that particular sized tube
Also think about how close to the filter you're going to weld the boss in because you may need a screen in there if you're wanting to put it right next to the filter.
Which reminds me Joe.. what is the I/D of you tube I keep meaning to ask? and I will be welding the boss about 300mm from the filter should be fine.
Last edited:
Yeh i see what your saying mate.
If u can remember that bar that would be great as thats my only problem now to be fair & after seeing yours i dont want to mount it any other way, best and most secure of seen.
So your car will be off the road for abit longer i take it......maybe i could buy your bar
Haha Im afraid its fitted and not going anywhere mate
nice try though!I'll pm you the dimms when I get a chance.
Drop me a text tomorrow mate I'll see what I can do. 300mm should be fine I would of thought.
Haha Im afraid its fitted and not going anywhere mate
I'll pm you the dimms when I get a chance.
Ok cool, dont forget now
Thanks
Hello mate I haven't forgotten you! I took the measurements last night, I will draw you up a drawing at work today
Pheew, i just logged on here expect the PM box to pop up which didnt then i seen this
Im afraid its all sold mate, I completely forgot you were interested! Otherwise I would of asked.
fair enough , they sell quickly my k04 kit sold in a day , now i'm starting from k04 platform should be simpler might see if jbs finally got any in stock
- Status
Similar threads
