Car scanner pro app coding

[G_mac86]

Can you code in full led flash?

After paying for the full app I could code this in so fog lights flash with full beam flash - they don't come on when full beam on all the time. Haven't really looked at the other coding options yet, but worth what I paid, plus I got a discount on the app through play store!

 

[b1ggus]

Tried this today with my son's 2017 Leon SC 1.4 150 FR Tech and enabled needle sweep, unhelpfully called 'Test pointers at engine start', and also visual Park Pilot with only rear sensors using the long coding...

1 - Module 76 - Assisted parking
2 - Extended coding (Bytes Mode)
3 - Byte 2 - (Activate Bit 0)

The sensors now display visually but the actual beeping no longer accompanies them, is this right or have I missed something?

Secondly, how would I do something like this using the app...

1 - Module 09 - Electronic control unit - Code (31347)
2 - Adaptation
3 - Spiegelverstellung
4 - Funk spiegelaklappung modus - (Change value to By look command via remote control key)

...as going to Module 09 in the menu only offers changing Bytes

 

[Daggerw9]

Hi all thought id post up a bargain.
On the play store this app can perform long coding and adaptations to all the seat audi vw range and cost like 3 quid.

So far i have done
Needle sweep
Engine torque limitation
Drl off with switch in off position
Drl dim with indicators.
Esc options esc off and esc sport

The weekend i am installing rain light humidty sensor for auto light and wipers.

The app is really good and works with elm 327 thought id let yall know

Where is the option for the needle sweep in car scanner I have the full paid version

 

[kazzz25]

Tried this today with my son's 2017 Leon SC 1.4 150 FR Tech and enabled needle sweep, unhelpfully called 'Test pointers at engine start', and also visual Park Pilot with only rear sensors using the long coding...

1 - Module 76 - Assisted parking
2 - Extended coding (Bytes Mode)
3 - Byte 2 - (Activate Bit 0)

The sensors now display visually but the actual beeping no longer accompanies them, is this right or have I missed something?

Secondly, how would I do something like this using the app...

1 - Module 09 - Electronic control unit - Code (31347)
2 - Adaptation
3 - Spiegelverstellung
4 - Funk spiegelaklappung modus - (Change value to By look command via remote control key)

...as going to Module 09 in the menu only offers changing Bytes

Where did you get this information? I mean to know how to code park assist? Is there a long coding guide or something? I'm looking to get rear LEDs to come on as part of DRL. Thanks

 

[ARH]

Where is the option for the needle sweep in car scanner I have the full paid version

from post 22 above "enabled needle sweep, unhelpfully called 'Test pointers at engine start'," I believe in dashboard settings

 

[leadbeatter16]

Hi, came across this while searching for an OBD eleven tool. Looking at adding android auto but I would need to code it when installing. Would this do the job? Thanks

 

[serdar_18fr]

Hi, came across this while searching for an OBD eleven tool. Looking at adding android auto but I would need to code it when installing. Would this do the job? Thanks

Android Auto is a FEC (Function Enabling Code) controlled feature and your infotainment unit needs to be patched with modified firmware to allow using a cracked FEC. This can't be done by Car Scanner or OBD11, you'd need a retrofitter's services, or to buy licensed Full Link activation from a dealer.

 

[Ex_Leon_ST_FR_Owner]

Hi, came across this while searching for an OBD eleven tool. Looking at adding android auto but I would need to code it when installing. Would this do the job? Thanks

No, for that you either need a professional or try DIY *at your own risk* with sdcard patches from mibsolution.one. Note - these patches are specific to certain hardware and firmware so proceed with caution - but done right I know it works (because I did it on my car).

Where car scanner pro did come in useful was in adding back in some settings that were lost when I changed my multimedia unit for one from a different car with a different audio/speaker setup. Car scanner pro let me load up the correct Seat Sound settings for my car - so it is very definitely worth buying at the price it is (or was!) - also scans my alfa and many other cars.. absolute bargain compared to OBD11 which I also had for a while.