Cupra Sticker on the boot

[mordzy]

I dont know if this was the same on anyone elses but the person who stuck the cupra letters on mine was blind.

washed the car today and noticed the 'U' is a good 10mm higher than the rest of the letters.

i was laughing at a friends K1 the other week as his were all slightly rotated at different angles.

whats the best way to remove safely and re apply? i have heard someone suggest a hairdryer before to warm up the adhesive which makes it easier to remove.?!

 

[RobH]

hi, hairdryer should help getting them off but dont know about putting back on. good look though.

 

[eddiel34]

Wish I could find the Bas***d who de-badged my old Cavvy GSi free of charge. The f***er done a sterling job.

Like everything, take your time, measure twice and be careful.

 

[mordzy]

Wish I could find the Bas***d who de-badged my old Cavvy GSi free of charge. The f***er done a sterling job.

Like everything, take your time, measure twice and be careful.

funny,

will double sided tape do for the re application? i dont want it falling off halfway to work and arriving in a CPRA

 

[Rob66]

Hi Buddy

Hairdryer and fishing line are your best best. Re replacing them could try double sided tape but could almost be worth getting a new set as if they come like the L E O N badge will already be spaced out correctly, and will only be a few quid.

Rob

 

[Tfsi_Mike]

Boil kettle pour it onto letters to soften glue comes off easily. Didnt even make a mark.

20quid from david at sere motors on here for new 'cupra' letters with foam sticky stuff on back