FMIC conversion! 63- 51mm 45 Deg Reducer help!

[Smoki333]

As title say, im looking to do the laguna conversion but SFS say i'll have to wait
6- 10 weeks for a pipe!! ( 63 - 51mm) 45 Degree Reducer.

Does anyone know anywhere else i could get this sooner or anyway around this ?

Was hoping to do the FMIC as we still have nice weather

cheers for any help.

 

[Saul]

http://www.siliconhoses.com/

 

[flashbsd]

www.rallydesign.co.uk, grab a samco one from here. Siliconhoses.com are made in a shed!

 

[beezaturbo]

rally design dont do a 63-51 dreducing 45 or atleast not when i ordered mine from them. i used burtonperformance but they are out of stock at the moment should be hear end of the week i'ver been told. got everything else from rallydesign next day delivery samco stuff.

 

[Smoki333]

Cool Cheers! Hi hear Samcos are a little shorter. I don't want anything to tight and pull on each other. will they be fine?

 

[Saul]

www.rallydesign.co.uk, grab a samco one from here. Siliconhoses.com are made in a shed!

really, i thought they were made by Forge

 

[flashbsd]

www.merlinmotorsport.co.uk then

yeah samco will be fine, the 135degree one is short with samco;s, i got SFS cos they are generous with length, i had to trim on the 45 reducer slightly anyway.

 

[flashbsd]

really, i thought they were made by Forge

Nope just a forge label put on some hoses!

 

[RichardBW]

Forge are the official distributor for SH.Com. All race parts (ie 90deg, 45deg, 1mtr straights,etc are labelled up as SH.COM. Any hoses that are made for specific Forge developed kits for coolant, boost or IC kits carry the Forge branding but are manufactured by SH.COM.
It must be one hell of a shed to manufacture then as we have run out of space for stock here at Forge? ; )

 

[flashbsd]

Forge are the official distributor for SH.Com. All race parts (ie 90deg, 45deg, 1mtr straights,etc are labelled up as SH.COM. Any hoses that are made for specific Forge developed kits for coolant, boost or IC kits carry the Forge branding but are manufactured by SH.COM.
It must be one hell of a shed to manufacture then as we have run out of space for stock here at Forge? ; )

just goign off what ive been told , along with the lack of address contacts for them, only a 0845 or email address

 

[Revo Kev]

Even if it were made in a shed (which is doubtful) what's the problem?!

I've used them and have had no issues with quality whatsoever, add to that the reputed back up you get through Forge and you're onto a winner!

 

[mrcoyote]

just goign off what ive been told , along with the lack of address contacts for them, only a 0845 or email address

Maybe you shouldn't repeat everything that you're told, especially when it can be considered libelous...

 

[Scotty_b]

Flash ive been around the SH.com plant (and forge) and all i can say is woooooooow! Great set up, great stock and they really do know there stuff, there not just starting up they have a depth of experience that is simply impressive and you know I don’t give out praise very often!. They just don’t do decent colours! (and by that I mean yellow!)

I have now on my car two samco pipes, one SFS (soon to be three from a long time order) and one SH.com one (forge labelled) and to be truthful the SH one is the best quality out of the bunch.

As soon as they expand the range for the BAM engine I will be getting some of these (in black)

p.s not haven ago fella just thought you may want a recommendation on what to go for

 

[flashbsd]

na i dont see why peeps on here take everything to heart and so seriously lol.

my tip is SH and its fine!

if i had posted it without smileys it would have been serious! SCN is funny sometimes

 

[mrcoyote]

The problem is that some people will read what you've written and believe that it's true... just like the official part of your user title...

 

[ibiza-cupra]

theres always a good selection on ebay