-
Hey Guest👍👎 We're looking for reviews of your local CUPRA or SEAT Dealership - it's quick and easy to do: Leave a review now
Tarnac Terror
Guest
One of the Best mods I;ve seen so far imo.
Just wish SEAT had thought about what they were doing when they mixed the honey comb in the lower bumper with the slats at the bonnet end so to speak.
Here's an idea, why not get "cupra R" done at stick it to the thin metal strip ? (shoot me down if its a stupid idea guys, I also drive a Ulysee MPV as well as me Cupra R !!)
Just wish SEAT had thought about what they were doing when they mixed the honey comb in the lower bumper with the slats at the bonnet end so to speak.
Here's an idea, why not get "cupra R" done at stick it to the thin metal strip ? (shoot me down if its a stupid idea guys, I also drive a Ulysee MPV as well as me Cupra R !!)
Looks very well I must say...the total honeycomb stands out far better now good job!!
From reading what you said on how to make it I can see jus how hard is to make the total honeycomb in order to make it match especially with the slant but excellent job i must say!!
I'm a bit of a fan of the 'S' being there myself but it all depends on what you think urself but I do really like what you have done...like someone else mentioned you could stick a 'CUPRA' badge to match the boot over the black plastic bit to try and cover it would be an idea but your car is your car so don't let us talk you into something lol!! Looking at that I would love to have something very similar to what you have only with the 'S' on the honeycomb and maybe the 'CUPRA' badge there to fill the gap would be nice in theory me thinks lol!!
But excellent job keep up the good work!!
From reading what you said on how to make it I can see jus how hard is to make the total honeycomb in order to make it match especially with the slant but excellent job i must say!!
I'm a bit of a fan of the 'S' being there myself but it all depends on what you think urself but I do really like what you have done...like someone else mentioned you could stick a 'CUPRA' badge to match the boot over the black plastic bit to try and cover it would be an idea but your car is your car so don't let us talk you into something lol!! Looking at that I would love to have something very similar to what you have only with the 'S' on the honeycomb and maybe the 'CUPRA' badge there to fill the gap would be nice in theory me thinks lol!!
But excellent job keep up the good work!!
Thanks very much guys!
Yeah well as its been said the blank strip doesnt look so bad in the flesh, as its in line with the bonnet line and so gets lost abit.. it gives the car a whole more aggressive stance without the "S" Hopefully i will finish and spray the de-badge slated version i have started, for someone else to have the look!
P.S. the plates where made by a company on the internet, cant tell you the place as the missus brought them for me, but will see if she remembers... (highly unlikely, remembers where that dress she saw 10 years ago thats she wanted, but ask her for where she got my plates from 6 months ago and well.. you can guess! lol)
Yeah well as its been said the blank strip doesnt look so bad in the flesh, as its in line with the bonnet line and so gets lost abit.. it gives the car a whole more aggressive stance without the "S" Hopefully i will finish and spray the de-badge slated version i have started, for someone else to have the look!
P.S. the plates where made by a company on the internet, cant tell you the place as the missus brought them for me, but will see if she remembers... (highly unlikely, remembers where that dress she saw 10 years ago thats she wanted, but ask her for where she got my plates from 6 months ago and well.. you can guess! lol)
I posted this to this thread earlier today which is why it popped up again but the post kind of got lost at the end of page 2 so I don't think anyone noticed it
Basically just after a rough guide to costs/ease of replacing the honeycomb grill on my LC if anyone would be so kind?P.S. I like those alloys Slick - looking to get some for myself, what are they and did they cost??
Last edited by a moderator:
I posted this to this thread earlier today which is why it popped up again but the post kind of got lost at the end of page 2 so I don't think anyone noticed it
P.S. I like those alloys Slick - looking to get some for myself, what are they and did they cost??
Sorry pas, didnt see your post!
if you mean a replacement i think its about MY03 honeycomb grill, £17 with the S in it.. but the one i have made is a custom one and is for a Cupra R bumper not the MY03 bumper that you have...
As for ease, 4 clips and one screw to replace. but as i said, that when its standard for standard swap!
As for wheels, thanks and there SW Alloys, called Mesh Black 19" for just under £1300 for them!
perfect just what i was looking for! love it
also you ever get any probs with the old bill for the bike number plate of the front...love that too!
Im not a fan of the centre peice if im honest .. the sides look cool but i think if you did the sides and not the centre it would look odd..
good work though
good work though
Slick changed his number plate for that reason.perfect just what i was looking for! love it
also you ever get any probs with the old bill for the bike number plate of the front...love that too!
I had one of those plates on mine for a year, no issues with the police, probably just lucky though!
Same here, and i park next to a police station every day.
although with all the other cars mine just blends in and they dont see it.
I have honey combed the center and removed the S and I have the cupra side honey comb bits to replace the slats I'm just slacking at the mo as can't be bothered to take the bumper off lol , I allso have a 3/4 size number plate have been running one for a good few years
Dan the front of your car looks evil
I've had a look on ebay and some other site, but can't seem to find a set of honey combe grills for sale. Can anyone point me in the right direction please, or does everyone just make a DIY one or something?
I've had a look on ebay and some other site, but can't seem to find a set of honey combe grills for sale. Can anyone point me in the right direction please, or does everyone just make a DIY one or something?
Thanks the fly eye kit makes the lights look evil I think , there are some cupra side honey comb grill for sale at the min in for sale section , for the bottom mesh mine came from Germany so try there e bay , or pm rob don as he gave me the link I can't find it now for some reason , car should look better when side honey comb done
the fly eye kit makes the lights look evil I think , there are some cupra side honey comb grill for sale at the min in for sale section , for the bottom mesh mine came from Germany so try there e bay , or pm rob don as he gave me the link I can't find it now for some reason , car should look better when side honey comb done
Cheers, looks like Fly Eyes is moving premesis at mo so can't order but I do like the dark-vader esq front end you have going on there!!
Top motor!
Ah right well sure it won't be long till there done it's an awesome bit of kit and cheap , need to pull my finger out and do the side honey comb
, need to pull my finger out and do the side honey comb
Similar threads
