-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
FR Tdi Cruise control questions
- Thread starter daveyonthemove
- Start date
mark - u had a price from sowal yet
can you pm an email if someoe got one rather than ring all the time
can you pm an email if someoe got one rather than ring all the time
*Sigh* if only you werent in manchester - then I'd take that up... Might have to give TotalVAG a call to see if they can do it too.
I got my kit from VW teeside for about £70 and that included everything I needed and it came with a guide however I also used the guides below. (I can't post URLS yet so add the www)
uk-mkivs.net/forums/t/221940.aspx
carbasics.co.uk/vw_golf_mk4_cruise_control.htm
I fitted it myself yesterday and it was ok to be honest, but I have had to remove steering wheel and wipers before due to previous wiper problems. Loom was reasonably ok to install when following the guides. I also bought VAGCOM so activated the ECU myself.
I can give more details anyone needs any help.
uk-mkivs.net/forums/t/221940.aspx
carbasics.co.uk/vw_golf_mk4_cruise_control.htm
I fitted it myself yesterday and it was ok to be honest, but I have had to remove steering wheel and wipers before due to previous wiper problems. Loom was reasonably ok to install when following the guides. I also bought VAGCOM so activated the ECU myself.
I can give more details anyone needs any help.
nice one will be looking into this again there is a 50mph stretch of motorway i have to comute everyday at the moment so this will save me from some points
I know I've dug this up from the past but no point in starting a new thread............
I've found a vehicle being scrapped and it looks like this. Looks like it has cruise but does anyone know if the stalks are the same/it would fit.
From what I've read it seems like they will but need some confirmation really. Shouldnt take me long to strip it in the scrappy.
http://smg.photobucket.com/albums/v282/alcarp/?action=view¤t=toledostalk.jpg
I've found a vehicle being scrapped and it looks like this. Looks like it has cruise but does anyone know if the stalks are the same/it would fit.
From what I've read it seems like they will but need some confirmation really. Shouldnt take me long to strip it in the scrappy.
http://smg.photobucket.com/albums/v282/alcarp/?action=view¤t=toledostalk.jpg
That's a cruise control stalk and should fit your car. As far as I know the TDI doesn't need any extra wiring - but I can't be certain - my old TDI 110 had cruise fitted as standard, and my current TDI 150 had cruise fitted by a previous owner.
Thanks mate.
I think I will open it up and take whatever wire that comes from the unit.
It has sat nav unit as well so need to look into what I need to take from it for that too.
Any idea how much a scrappy should be asking for?
there is a wire from the stalk to the penlum chamber (under the wiper motor) that you will need also. if your removing it yourself i would say 20 quid would be enough. they are about 80 new for the kit with fitting instructions.
sat nav. you will need the complete center console/facia and i would take the lower center console (that runs between the two front seats) too
sat nav. you will need the complete center console/facia and i would take the lower center console (that runs between the two front seats) too
joed4164
Guest
im goin 2 do this my self ive a tdi do all i need to do is install the Stalk and Loom from stalk to the connection box under the scuttle and it will work ?
will i need 2 get the cruise controll turned on by vag
will i need 2 get the cruise controll turned on by vag
Yeh just fit stalk and plug wires in to loom.....it helps to have the propper removal tool for the plugs when wirring in to fuse box.....then activate it via vagcom
joed4164
Guest
Similar threads
