i am after fitting a boot gauge and have read various threads talking about fiting a vacuum hose to the Intercooler pipe but i dont have an intercooler and was wondering if i still can and if so how?
Looking from the front, standing looking at the engine bay, the coolant bottle is on the left had side, and the intercooler pipe runs right next to it from the bulkhead towards the front of the car, then goes down towards the front of the drivers side wheelarch.
You have to take the intercooler pipework off Andy and drill a hole through, then tap a nipple into it so you can connect the boost gauge. It's not just a plug and play thing. Then you have to find a way for the boost pipe to get into the cabin from the engine bay and feed it all through....
Are you going to make a guide when you do this? I have a boost guage fitment on my EGR race pipe, just need a guage and the know how to plumb it through the firewall and then to plumb the guage power cables up.
Are you going to make a guide when you do this? I have a boost guage fitment on my EGR race pipe, just need a guage and the know how to plumb it through the firewall and then to plumb the guage power cables up.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.